3DBoomer
RRCRat Rig Community [Unofficial]
•Created by 3DBoomer on 10/15/2024 in #fix-my-printer
error add_prime_probe_to_offset...
2 replies
RRCRat Rig Community [Unofficial]
•Created by 3DBoomer on 9/5/2024 in #ratos-support
Ratos 2.1 + Prusaslicer time estimate and layers N°
5 replies
RRCRat Rig Community [Unofficial]
•Created by 3DBoomer on 8/31/2024 in #ratos-support
2 in line extruders...
Hi all.
I'm trying (failing !) to put 2 extruders in serie :
I have an LGX (heavy) already in place, via toolboard.
I've added an LGX Lite upstream on the spool end.
Connected on Octopus 1.1 on Motor 3 (TMC2209 in place).
RatOS v2.1.0-RC2
I must be doing something stupid I'm missing : # serial-extruder-sync.cfg
#[board_pins btt-octopus-11]
#aliases:
#-------------------------------------------- MOTOR 3 (LGX Lite) motor pins --------------------------------------------
Assigned to slot: "MOTOR 3"
#------------------------------------------------------------------------------------------------------------
#------------------------------------------- EXTRUDER motor pins --------------------------------------------
e1_step_pin=PG4,
e1_dir_pin=PG3,
#e1_enable_pin=PG0,
e1_uart_pin=PC7,
Configurator Metadata
{
"type": "extruder",
"title": "Bondtech LGX Lite"
}
[extruder1]
rotation_distance: 5.57
full_steps_per_rotation: 200
filament_diameter: 1.750
max_extrude_only_velocity: 120
max_extrude_only_accel: 800
pressure_advance_smooth_time: 0.02
microsteps: 16
[tmc2209 extruder1]
uart_pin: pc7
interpolate: False
run_current: 0.85
stealthchop_threshold: 0
driver_TBL: 0
driver_HEND: 6
driver_HSTRT: 7
driver_TOFF: 4
Synchronisation des extrudeurs
[gcode_macro SYNC_EXTRUDERS]
gcode:
SYNC_EXTRUDER_MOTION EXTRUDER=extruder1 MOTION_QUEUE=extruder
Exécuter la synchronisation au démarrage
[gcode_macro _USER_STARTUP]
gcode:
# Autres commandes de démarrage utilisateur...
SYNC_EXTRUDERS
Any help would be really cool
22 replies
RRCRat Rig Community [Unofficial]
•Created by 3DBoomer on 8/27/2024 in #ratos-support
Ratos v2.1.0-RC2-55-g157db24e Internal error on command:"PROCESS_GCODE_FILE"
35 replies
RRCRat Rig Community [Unofficial]
•Created by 3DBoomer on 2/28/2024 in #fix-my-print
Firmware retraction always on ?!?
4 replies
RRCRat Rig Community [Unofficial]
•Created by 3DBoomer on 2/5/2024 in #fix-my-printer
No access to Mainsail interface since full Ratos Update this AM
4 replies
RRCRat Rig Community [Unofficial]
•Created by 3DBoomer on 9/14/2023 in #fix-my-printer
V-core3-Octopus 1.1 -Pi 3a+ Ratos 2.02 : stops printing randomly #solved
Hi all,
This printer has been running about 2000 h.
It started to stop at various height (tried different prints), without any error message.
It seem to just reboot completely.
I've upgraded from Ratos 1 to 2.0, reinstalled.
Same bug !?!
Only thing I did yesterday was change the Rapido nozzle, very carefully.
I wish I knew how to diagnose klipper.log ....
18 replies
RRCRat Rig Community [Unofficial]
•Created by 3DBoomer on 8/7/2023 in #fix-my-printer
fix-my-brain : How-to use set kinematics center ?
I can't find any comprehensive quick guide for it ?
1 replies
RRCRat Rig Community [Unofficial]
•Created by 3DBoomer on 6/19/2023 in #fix-my-printer
Heater extruder not heating at expected rate
21 replies
RRCRat Rig Community [Unofficial]
•Created by 3DBoomer on 5/25/2023 in #ratos-support
Making max_accel_to_decel proportional ?
I can't get max_accel_to_decel to adjust dynamically on Accel changes and couldn't find answers in previous posts.
Printer.cfg is : [include RatOS/printers/v-core-3/speed-limits-performance.cfg]
Superslicer travel_deceleration_use_target is ticked.
Any help ?
12 replies
RRCRat Rig Community [Unofficial]
•Created by 3DBoomer on 5/22/2023 in #fix-my-resonance
V-core 3.1^500 - Fystec rail - weird graphs
3 replies
RRCRat Rig Community [Unofficial]
•Created by 3DBoomer on 4/3/2023 in #ratos-support
Mk3s - Einsy - Pi Zero : Making a Ratos Lite ?
Hi all,
I've been running Klipper/Mainsail on my bears for a while, on PI Zero on UART (not the pi 2 Zero) : The Einsy can't supply enough amps even for a Pi3A+ and, without any fancy stuff (cameras...), the Pi Zero does the job very well.
I wanted to update them to Ratos 2.0 for a better farm consistency.
The config is really tuned as I like it (great job !), but even the 32bit version looks too heavy ("timer too close" crashes).
Can I remove sections like crowsnest and other ressource intensive stuff via putty and do I guess removing sections from Moonraker ?
Thanks a lot in advance, I intend to spend the night on it !
15 replies
RRCRat Rig Community [Unofficial]
•Created by 3DBoomer on 3/27/2023 in #ratos-support
Buddy Board not flashing on prusa mini...
21 replies
RRCRat Rig Community [Unofficial]
•Created by 3DBoomer on 3/21/2023 in #fix-my-printer
BLTouch fails on mesh, too close
V-core 3.1 / Volcano UHF : Z-tilt goes great, then on first bed mesh probing, the BLTouch pin bounces of the bed and generates error. Strangely, it works after a few retries although still frustrating
4 replies
RRCRat Rig Community [Unofficial]
•Created by 3DBoomer on 3/15/2023 in #fix-my-printer
Random crashes during print.
Hi all, I've spent days on this with no result : printer used to work fine for 100's hours. Installed "Cancel Object" and updated PAM. Random crashes started after this intsall. Since, I've even created a new RatoS V2 and installed. Same symptoms. I have no idea what to look for in my klippy.log....
hanks in advance for any help,
13 replies