Maverik Posts - Answer Overflow

Maverik

•Created by Maverik on 9/18/2024 in #fix-my-print

Under Extrusion on corners

Hello, I have a newly built V4 Hybrid and the first print is the skew print from the guide. But it seems that on corners I get under extrusion and then things start to peel off. I haev the default PS profile with Prusament PETG, Orbiter 2 and Rapido 0.6 UHF. What could I try to fix this thing please? Thank you in advance

6 replies

RRCRat Rig Community [Unofficial]

•Created by Maverik on 9/18/2024 in #fix-my-resonance

Vcore4 Hybrid belt tension

5 replies

RRCRat Rig Community [Unofficial]

•Created by Maverik on 9/17/2024 in #fix-my-printer

TMC 'stepper_y' reports error: GSTAT: 00000004 uv_cp=1(Undervoltage!)

TMC 'stepper_y' reports error: GSTAT: 00000004 uv_cp=1(Undervoltage!) Once the underlying issue is corrected, use the "FIRMWARE_RESTART Hello, I fresh installed ros and I get this error. Any idea what it could be? Broken stepper cable maybe? Thank you

12 replies

RRCRat Rig Community [Unofficial]

•Created by Maverik on 11/9/2023 in #fix-my-print

No bridging is possible

I am having troubles to get any bridge done on my V3. I have Rapido with Orbiter and SANYO DENKI 4028 Axial Fan - 9GAX0412P3S001 . I tried to play with the bridge speeds, fan speeds and other settings but without any resolution. I tried also to use prusa slicer as well as super slicer, tried even default profiles etc but without any improvement. I am attaching an exported super slicer project as well as a video. Any help would be greatly appreciated

29 replies

RRCRat Rig Community [Unofficial]

•Created by Maverik on 11/7/2023 in #fix-my-printer

Upgrading from lgx to orbiter and doing the toolhead upgrade I have underextrusion

45 replies

RRCRat Rig Community [Unofficial]

•Created by Maverik on 11/6/2023 in #ratos-support

Option 'control_pin' in section 'bltouch' must be specified while selecting pinda as probe

Can someone please help me figure out where I go wrong in my config? Switched from bltouch to pinda while doing the tollhead upgrade. And Pinda is connected to the tollboard. Thank you

33 replies

RRCRat Rig Community [Unofficial]

•Created by Maverik on 5/5/2023 in #ratos-support

pin ADC_TEMPERATURE used multiple times in config

Can anyone please tell me what can I look into for this error? pin ADC_TEMPERATURE used multiple times in config Searched the discord and found only one reference and did not see anything useful From the logs I see

Traceback (most recent call last):
  File "/home/pi/klipper/klippy/klippy.py", line 175, in _connect
    self._read_config()
  File "/home/pi/klipper/klippy/klippy.py", line 141, in _read_config
    self.load_object(config, section_config.get_name(), None)
  File "/home/pi/klipper/klippy/klippy.py", line 130, in load_object
    self.objects[section] = init_func(config.getsection(section))
  File "/home/pi/klipper/klippy/extras/temperature_sensor.py", line 42, in load_config_prefix
    return PrinterSensorGeneric(config)
  File "/home/pi/klipper/klippy/extras/temperature_sensor.py", line 14, in __init__
    self.sensor = pheaters.setup_sensor(config)
  File "/home/pi/klipper/klippy/extras/heaters.py", line 285, in setup_sensor
    return self.sensor_factories[sensor_type](config)
  File "/home/pi/klipper/klippy/extras/temperature_mcu.py", line 31, in __init__
    self.mcu_adc = ppins.setup_pin('adc',
  File "/home/pi/klipper/klippy/pins.py", line 117, in setup_pin
    pin_params = self.lookup_pin(pin_desc, can_invert, can_pullup)
  File "/home/pi/klipper/klippy/pins.py", line 106, in lookup_pin
    raise error("pin %s used multiple times in config" % (pin,))
pins.error: pin ADC_TEMPERATURE used multiple times in config

Thank you

12 replies

RRCRat Rig Community [Unofficial]

•Created by Maverik on 5/4/2023 in #fix-my-print

No bridging possible

7 replies

Gaming

Programming