Jens
RRCRat Rig Community [Unofficial]
•Created by Jens on 1/30/2024 in #german-support
ROME unload filament macro
Will nicht so wirklich. Der führt das Macro während des Drucks gar nicht aus, sondern zieht das Filament einfach zurück.
64 replies
RRCRat Rig Community [Unofficial]
•Created by Jens on 1/9/2024 in #ratos-support
Beacon Probe doesn't work after ratos/mainsail is ready
I am trying to get beacon probe running but i am having problems with it not triggering. My nozzle made frieds with the print surface two times already.
What is very interesting..
My printer AC 230V is switched by a shelly relay.
If the shelly and the rpi are off, nothing works of course.
If i power up the rpi and wait for it to go online, i connected to the Webinterface and it says not ready, obviously because there is no 24V to the Mainboard and Toolboard.
In this state the beacon triggers on everything that is remotely metal. (LED goes on)
As soon as i activate the shelly relay and, the psu powers on and supplies 24V. After the main- and Toolboard are up and running, mainsail says everything is fine but now the beacon no longer triggers on anything.
Someone got an idea?
8 replies
RRCRat Rig Community [Unofficial]
•Created by Jens on 5/19/2023 in #ratos-support
Klipper install dirty after update of ratos and klipper
79 replies
RRCRat Rig Community [Unofficial]
•Created by Jens on 5/10/2023 in #fix-my-print
PETG fast printing
4 replies
RRCRat Rig Community [Unofficial]
•Created by Jens on 5/8/2023 in #fix-my-printer
Linear rails development of damage while in use
17 replies
RRCRat Rig Community [Unofficial]
•Created by Jens on 5/2/2023 in #fix-my-printer
Linear Rail damaged?
6 replies
RRCRat Rig Community [Unofficial]
•Created by Jens on 5/2/2023 in #fix-my-resonance
Did i do something wrong?
20 replies