Jens
RRCRat Rig Community [Unofficial]
•Created by Serdar1976 on 6/29/2024 in #german-support
Z_TILT_ADJUST Z-Tilt Probleme beim Abfahren
Das ist was ganz anderes
37 replies
RRCRat Rig Community [Unofficial]
•Created by Serdar1976 on 6/29/2024 in #german-support
Z_TILT_ADJUST Z-Tilt Probleme beim Abfahren
Was Takuya sagt.
Irgendwas stimmt mit der Mechanik nicht.
Ferndiagnose extrem schwierig. Guck mal, ob du den Drucker manuell auf die richtigen positionen fahren lassen kannst
37 replies
RRCRat Rig Community [Unofficial]
•Created by Serdar1976 on 6/27/2024 in #german-support
Triangellab Euclid: Shutdown due to expected probe state to be stowed but is deployed (0)
Damit musst du dann wohl mal in #ratos-support oder #ratos-development stolpern.. wenn die macros einzeln funktionieren, stimmt was anderes nicht
78 replies
RRCRat Rig Community [Unofficial]
•Created by Serdar1976 on 6/27/2024 in #german-support
Triangellab Euclid: Shutdown due to expected probe state to be stowed but is deployed (0)
Drucker ist wohl explodiert, weil es schon so lange dauert😆
78 replies
RRCRat Rig Community [Unofficial]
•Created by Serdar1976 on 6/27/2024 in #german-support
Triangellab Euclid: Shutdown due to expected probe state to be stowed but is deployed (0)
Du kannst aber auch x und y homen und die Koordinaten mal selbst ansteuern (langsam fahren)
78 replies
RRCRat Rig Community [Unofficial]
•Created by Serdar1976 on 6/27/2024 in #german-support
Triangellab Euclid: Shutdown due to expected probe state to be stowed but is deployed (0)
Dock 250,500
Exit 250, 420
Side 300, 500
Preflight 300,420
Kannst du mal so testen, keine Garantie
78 replies
RRCRat Rig Community [Unofficial]
•Created by Serdar1976 on 6/27/2024 in #german-support
Triangellab Euclid: Shutdown due to expected probe state to be stowed but is deployed (0)
Dock ist klar,
Dock Exit is wo er nach dem deploy hinfährt (mit euclid dran),
side is wo er vom Dock aus hin fährt um die probe zu entfernen,
preflight ist ein Ort "in der Nähe" von dem er immer startet
78 replies
RRCRat Rig Community [Unofficial]
•Created by Serdar1976 on 6/27/2024 in #german-support
Triangellab Euclid: Shutdown due to expected probe state to be stowed but is deployed (0)
Wie hast du das denn geschafft?
78 replies
RRCRat Rig Community [Unofficial]
•Created by Serdar1976 on 6/27/2024 in #german-support
Triangellab Euclid: Shutdown due to expected probe state to be stowed but is deployed (0)
Wenn du es manuell mit deploy_probe machst, geht es, wenn du z homest, dann nicht?
78 replies
RRCRat Rig Community [Unofficial]
•Created by Serdar1976 on 6/27/2024 in #german-support
Triangellab Euclid: Shutdown due to expected probe state to be stowed but is deployed (0)
Du kannst den macro_travel_speed reduzieren
78 replies
RRCRat Rig Community [Unofficial]
•Created by Serdar1976 on 6/27/2024 in #german-support
Triangellab Euclid: Shutdown due to expected probe state to be stowed but is deployed (0)
Bilder von der Verdrahtung, Config und was die endstops im machine tab sagen, sonst können wir hier wild raten aber nicht helfen
78 replies
RRCRat Rig Community [Unofficial]
•Created by Serdar1976 on 6/27/2024 in #german-support
Triangellab Euclid: Shutdown due to expected probe state to be stowed but is deployed (0)
Ja, weil das eine Sicherheitsfunktion ist, die hier auslöst
78 replies
RRCRat Rig Community [Unofficial]
•Created by Serdar1976 on 6/27/2024 in #german-support
Triangellab Euclid: Shutdown due to expected probe state to be stowed but is deployed (0)
Auf die Frage von @NutellaBrot155|RR400|DE nach den endstops kam auch keine Antwort
78 replies
RRCRat Rig Community [Unofficial]
•Created by Serdar1976 on 6/27/2024 in #german-support
Triangellab Euclid: Shutdown due to expected probe state to be stowed but is deployed (0)
Per hand drauf machen löst den fehler auch aus
78 replies
RRCRat Rig Community [Unofficial]
•Created by Serdar1976 on 6/27/2024 in #german-support
Triangellab Euclid: Shutdown due to expected probe state to be stowed but is deployed (0)
Hängt die euclid schon am Toolhead, ja oder nein
78 replies
RRCRat Rig Community [Unofficial]
•Created by Serdar1976 on 6/27/2024 in #german-support
Triangellab Euclid: Shutdown due to expected probe state to be stowed but is deployed (0)
...
78 replies
RRCRat Rig Community [Unofficial]
•Created by Serdar1976 on 6/27/2024 in #german-support
Triangellab Euclid: Shutdown due to expected probe state to be stowed but is deployed (0)
Der drucker erwartet, dass die Probe NICHT verbunden ist aber sie hängt schon am Toolhead
78 replies
RRCRat Rig Community [Unofficial]
•Created by Serdar1976 on 6/27/2024 in #german-support
Triangellab Euclid: Shutdown due to expected probe state to be stowed but is deployed (0)
Das Problem ist ganz genau das was da steht
78 replies
RRCRat Rig Community [Unofficial]
•Created by flat-fuchsia on 6/19/2024 in #german-support
Rapido 2 Heat Creep/Clogging
Wenn du deine persönliche Meinung weggelassen hättest, wäre die Resonanz bestimmt besser gewesen.
Du hast nichts hilfreiches beigetragen sondern nur deinen Unmut geäußert.
Sehr viele (inkl. meiner Wenigkeit) haben gar keine Probleme mit dem Hotend und Druckkopf, daher ist es eigentlich schon ungewöhnlich, dass man solche Probleme hat, besonders wenn diese plötzlich auftreten.
17 replies
RRCRat Rig Community [Unofficial]
•Created by Serdar1976 on 6/24/2024 in #german-support
Fan Lüfter Steuern Printer.cfg
tachometer ist ne spezielle Art pin, das hat nicht jeder lüfter
34 replies