OldKingHamlet
RRCRat Rig Community [Unofficial]
•Created by OldKingHamlet on 9/6/2024 in #fix-my-resonance
"Oh, my V-Core 3.1 is working almost perfectly. I'll make it even better" then this
6 replies
RRCRat Rig Community [Unofficial]
•Created by OldKingHamlet on 8/17/2024 in #fix-my-printer
Filament unloads on RR 2.1 RC making weird "nubs", leading to clogs.
2 replies
RRCRat Rig Community [Unofficial]
•Created by OldKingHamlet on 8/8/2024 in #fix-my-mesh
Beacon scan exposed waves in sheet/plate
8 replies
RRCRat Rig Community [Unofficial]
•Created by OldKingHamlet on 6/9/2024 in #fix-my-printer
The hell is this clicking?
30 day old bearings (3->3.1 upgrade). Frame is squared to 0.1mm total variance on bed levelling. My theory is that either the belt has some variance that causes it to push up then click off the pulley, or the frame is somehow not square and the belt is not travelling through the motor cage in a linear fashion. Or something. I've spent way too long trying to iron this out.
7 replies
RRCRat Rig Community [Unofficial]
•Created by OldKingHamlet on 5/8/2024 in #fix-my-mesh
Bed Mesh taco with some obvious inflection from alignment
10 replies
RRCRat Rig Community [Unofficial]
•Created by OldKingHamlet on 4/23/2024 in #fix-my-printer
Clicking noise on x/y axis travel
So, I'm new to Ratrig/Vcore, as I recently picked up a Vcore 3 for a very reasonable price.
I'll start this weekend with really sitting down and making sure the printer is fully squared, then making sure everything's nice and clean and properly set.
Anyways, in my initial testing of the unit, I've noticed this clicking during some movements, and it appears to be coming from the vicinity of the back right motor/roller assembly. My gut tells me bearing, but on a printer I'm not fully knowledgeable in, it could also be many super specific corner cases.
Anyways, attached video of z tilt calibration. You can hear one click right at the beginning, then several clicks in rhythmic order a bit after that as the carriage moves from the second z tilt properly spot.
I'd assume bearing or something wrong with the internals of the back right belt loop madness, but I'm hoping someone here could either confirm that, or point me in a more appropriate direction. Or, tell me I'm being insane and it's not a concern.
8 replies