C:\ cloning to new NVME did not go as expected.
So yeah I got my new ram and nvme today. The ram part went quite well with no issues. Too bad I can't say the same about the NVME. So, my intention was to clone my small 120GB C and make the 1TB nvme a "new C" and booting drive. Now, I used the software called "Macrium Reflect". I followed all the steps based on a YT tutorial, the cloning did happen HOWEVER, instead of having one new drive instead, I ended up having two cloned partitions. Meanwhile the so called H, was suppose to be the NVME. As...
Should I use AV1 or h264 for recording on arc a380?
I record at 1440p60fps and like to use CBR cus often do I find CQP or ICQ to eat up tons and tons of storage in some clips more motion heavy clips and usually dont really look as good as just recording in CBR. For av1 which iv been using for awhile I record at 25000kbps and would it really be required to up the bitrate more to get more quality out of the h264 recorder or is it just fine as it is?
I read in some places about how you really shouldn't use AV1 at higher bitrates because the encoder loses its big bonus of really efficent encoding and is extremely similar to other encoders above around 15000kbps.
In the ss I showed from my own perception the H264 encoding seems to have these weird lines in the black compared to the av1 which has none of the lines, im not entirely sure if this would appear in actual gaming videos somehow and I'm not exactly too sure what is causing that....
Capture card audio pop
Ive been having a audio popping issue ever since my hd60 pro from elgato i know its older but i dont think it should have a audio popping issue considering i can barely find anything on it obs recording settings is normal ive tried yuy2 and nv12 and they both have audio popping and when i put it back to device defaults it works fine also i have the obs audio hz to 48000 and same on the device itself... any ideas or should i just keep it default ?
Best settings for Rx 6750 XT + Ryzen 5 2600
Hi, I recently got a new GPU and it's the first time I get an AMD GPU.
I'm a bit lost and finding some conflicting info online on what settings to use.
I am aware of the cpu bottleneck, but at the moment this is what I got.
OBS Version: 30.2.3...
Limited or Full Color Range
So for context I'm recording a Snow White VHS. Its hooked up to the Retrotink 5x and then captured by Cam Link Pro into OBS. I know for most game consoles on OBS, limited makes the most sense, but does that change on vhs captures?
First picture (Snow White Sleeping) is Full colorspace across the board (Tink, Cam, OBS)
Second picture (Dwarf Yawning) is Limited colorspace across the board (Tink, Cam, OBS)...
EVGA XR1 Pro Messed Up Capture
I just bought a new EVGA XR1 Pro and the video I see from it on my monitor is normal but this is what the capture looks like in both discord and OBS. I've tried fiddling with the resolution but it doesn't seem to do anything. I'm feeding 480p video into it from a retrotink 2x pro.
Solution:
Turning on the line doubling feature on the retrotink fixed it! I'm not sure why it needed to be on but it works now!
CPU Encoding Overload With GPU Encoding
Currently using testing changing my setup to use Twitch Enhanced Streaming and Aitum Multi. And noticed I was still receiving . "Encoder Overload" errors and dropped frames during scene transitions.
((Update))
While OBS is running I see a pretty sizable CPU Utilization that will spike to 100% during certain transitions.
...
