Sharpplayer96
RRCRat Rig Community [Unofficial]
•Created by Sharpplayer96 on 1/19/2024 in #fix-my-print
Potential pressure advance issue
6 replies
RRCRat Rig Community [Unofficial]
•Created by Sharpplayer96 on 1/11/2024 in #fix-my-printer
Loud buzzing sound coming from toolhead
8 replies
RRCRat Rig Community [Unofficial]
•Created by Sharpplayer96 on 9/20/2023 in #fix-my-printer
Loud Buzzing Sound Under Certain Conditions
V-Core 3.1 400mm
I encounter a very loud buzzing sound under certain conditions (which I'm not exactly sure what those conditions are)
Not sure if it's a speed/acceleration issue, motor issue, or a loose screw. It doesn't happen often or all the time but was not occurring during the first layer of this print but can be heard clearly on the second in the video. I'm not 100% sure but I believe it occurs mostly when printing in this direction so the right motor when facing the printer.
5 replies
RRCRat Rig Community [Unofficial]
•Created by Sharpplayer96 on 7/25/2023 in #ratos-support
Adaptive Mesh not working
I've been looking into the built in adaptive mesh in RatOS and can't get it to work
I enabled the variable_adaptive_mesh in my printer.cfg and added the X0, Y0, etc in SuperSlicer but it still probes the entire bed
Am I missing something or do I have to be on the develop branch or something?
https://os.ratrig.com/docs/configuration/adaptive-meshing
15 replies
RRCRat Rig Community [Unofficial]
•Created by Sharpplayer96 on 7/24/2023 in #fix-my-print
Fine Tuning PETG, Reduce Seam Blobs and Nozzle Build-up
2 replies
RRCRat Rig Community [Unofficial]
•Created by Sharpplayer96 on 7/19/2023 in #fix-my-print
Draft Shield Failed, How to Resume Print
All of my parts are fine but the draft shield popped off the bed, is there a way to resume the print without the draft shield or is the whole thing a loss?
1 replies
RRCRat Rig Community [Unofficial]
•Created by Sharpplayer96 on 6/30/2023 in #fix-my-print
MH Build Series PLA Has Horrible Stringing
3 replies
RRCRat Rig Community [Unofficial]
•Created by Sharpplayer96 on 1/6/2023 in #fix-my-printer
Motors have high pitch sound when enabled
I just upgraded my V-Core 3 from 3.0 to 3.1 and the enclosure kit.
After fighting a couple issues in the build I finally got it back up and running but noticed that it was pretty loud after homing. Kind of a high pitch whine and I feel like I didn't notice it before the upgrades.
I can get the sound to go away by disabling the x and y steppers. I didn't do anything to the motors outside of unplugging them and plugging them back in.
I think I remember some posts talking about motor buzzing due to an incorrect wiring diagram or something. Does that seem to be the issue I'm having?
5 replies
RRCRat Rig Community [Unofficial]
•Created by Sharpplayer96 on 12/29/2022 in #fix-my-printer
Y-endstop Not Close Enough
3 replies