Shades
RRCRat Rig Community [Unofficial]
•Created by Shades on 10/29/2024 in #fix-my-printer
VAOC LED ring not working
I've been able to confirm that the VAOC camera is working as is the VAOC fan, however when I try to trigger the LED ring to light up it doesn't seem to want to light up. I've only tried this via the little flash light Icon on the VAOC screen.
28 replies
RRCRat Rig Community [Unofficial]
•Created by Shades on 8/28/2024 in #ratos-support
RatOS 2.1.0-RC2 Reporting that it cant write to stepper_x's Globalregister.
Hello, so I just got done building a v-core 4, however my machine is non standard. I'm running an Octopus Pro 723 v1.1 board, 1 48v poser supply and 1 24v power supply using tmc 5160 pro v 1.1 drivers on the hybrid motion system (voltages altered to the suggested settings in RatOS) and tmc 2209's/24v on the z axis steppers (standard volatage).
Whenever I go to home klipper shuts down reporting that it cant write to "stepper_x globalregister". I did some research online and found that this usually means bad hardware. So I swapped the tmc 5160's around a few times - error was always stepper x. Thinking it was a bad board I swapped it for an older octopus pro 446 I had in another printer (known good board) - same issue. I'm starting to think that maybe its software related.
I'm currently going to try falling back to 2.1.0-rc1 to see if that makes a difference. Let me know if anyone else is having this issue and/or what files you need form me to assess things.
7 replies
RRCRat Rig Community [Unofficial]
•Created by Shades on 12/3/2022 in #fix-my-mesh
V-Minion Bed Mesh question
So I’m curious as to what a “good variance” would be for a machine of this size. I’ve been at it for a while today and the best I can get is a .091 mm variance. This is down from .455mm. Is it safe to stop here or should I keep on trying to improve it?
16 replies