Timmer2019 Comments - Answer Overflow

WARNING. DO NOT EDIT THIS FILE. To override settings from this file, you can copy and paste the relevant sections into your printer.cfg and change it there. Configurator Metadata { "type": "extruder", "title": "Orbiter 2" } [include orbiter.cfg] For LDO-36STH20-1004AHG motor [include ../steppers/ldo/36sth20-1004ahg/24v-0.7a-e.cfg]

33 replies

RRCRat Rig Community [Unofficial]

•Created by Timmer2019 on 1/22/2025 in #fix-my-printer

Access to configurator RatOS

and the orbiter-2.cfg:

33 replies

RRCRat Rig Community [Unofficial]

•Created by Timmer2019 on 1/22/2025 in #fix-my-printer

Access to configurator RatOS

WARNING. DO NOT EDIT THIS FILE. To override settings from this file, you can copy and paste the relevant sections into your printer.cfg and change it there. Configurator Metadata { "type": "extruder", "title": "Orbiter 1.0" } [extruder] rotation_distance: 4.63 full_steps_per_rotation: 200 filament_diameter: 1.750 max_extrude_only_velocity: 60 [firmware_retraction] retract_speed: 60 unretract_extra_length: 0 unretract_speed: 60 [tmc2209 extruder] run_current: 0.35 stealthchop_threshold: 0

33 replies

RRCRat Rig Community [Unofficial]

•Created by Timmer2019 on 1/22/2025 in #fix-my-printer

Access to configurator RatOS

Here is the orbiter.cfg:

33 replies

RRCRat Rig Community [Unofficial]

•Created by Timmer2019 on 1/22/2025 in #fix-my-printer

Access to configurator RatOS

you want the orbiter.cfg or the orbiter-2.cfg?

33 replies

RRCRat Rig Community [Unofficial]

•Created by Timmer2019 on 1/22/2025 in #fix-my-printer

Access to configurator RatOS

correct.

33 replies

RRCRat Rig Community [Unofficial]

•Created by Timmer2019 on 1/22/2025 in #fix-my-printer

Access to configurator RatOS

Good stuff! thank you!

33 replies

RRCRat Rig Community [Unofficial]

•Created by Timmer2019 on 1/22/2025 in #fix-my-printer

Access to configurator RatOS

Is this a complete OS re-install to 2.1?

33 replies

RRCRat Rig Community [Unofficial]

•Created by Timmer2019 on 1/22/2025 in #fix-my-printer

Access to configurator RatOS

So i updated the RatOS but it only upgraded to version v2.0.2-36..

33 replies

RRCRat Rig Community [Unofficial]

•Created by Timmer2019 on 12/13/2023 in #fix-my-printer

Retries aborting: Probed points range is increasing.

Thanks blacksmithforlife. I was also able to adjust the gantry for much better results..

4 replies

RRCRat Rig Community [Unofficial]

•Created by Timmer2019 on 3/1/2023 in #fix-my-print

Fan Horns.. really could use some help, please.

So I put on a 0.4mm nozzle and printed the horns.. still a little rough but much better.. can anyone tell me what setting to tweak to eliminate the interior enforcement wall from showing up on the outside of the print as seen in the first photo??

16 replies

RRCRat Rig Community [Unofficial]

•Created by Timmer2019 on 3/1/2023 in #fix-my-print

Fan Horns.. really could use some help, please.