skyline131313
RRCRat Rig Community [Unofficial]
•Created by skyline131313 on 3/20/2024 in #fix-my-print
Corners Warping with ABS
oh wow, did you add a chamber heater to you bambu or does it get that hot stock?
25 replies
RRCRat Rig Community [Unofficial]
•Created by skyline131313 on 3/29/2024 in #fix-my-printer
Z wobble or some sort of problem with gantry?
6 replies
RRCRat Rig Community [Unofficial]
•Created by skyline131313 on 3/29/2024 in #fix-my-printer
Z wobble or some sort of problem with gantry?
Yes I've tried all that, the vcore 3.1 comes with oldham couplers. The print head has flex but its not exactly wobbly. I've tried changing the extruder as well from orbitor v1.5 to v2.0 but no change either. I tune every new spool. I guess a correction for the y resonance, the y axis there is actually the z axis, so its vibrating up and down and only for that peak.
6 replies
RRCRat Rig Community [Unofficial]
•Created by skyline131313 on 3/29/2024 in #fix-my-printer
Z wobble or some sort of problem with gantry?
6 replies
RRCRat Rig Community [Unofficial]
•Created by skyline131313 on 3/20/2024 in #fix-my-print
Corners Warping with ABS
yah thanks
25 replies
RRCRat Rig Community [Unofficial]
•Created by skyline131313 on 3/20/2024 in #fix-my-print
Corners Warping with ABS
alright, I'll try that as well, I'm using glue stick and seems to be working with the extra brim at least
25 replies
RRCRat Rig Community [Unofficial]
•Created by skyline131313 on 3/20/2024 in #fix-my-print
Corners Warping with ABS
no, use isopropol alchohol, also heard people use dish soap and water but havent tried that yet
25 replies
RRCRat Rig Community [Unofficial]
•Created by skyline131313 on 3/20/2024 in #fix-my-print
Corners Warping with ABS
yah idk why, the corners just really dont want to stay in place. I could maybe try a cooler nozzle temp idk
25 replies
RRCRat Rig Community [Unofficial]
•Created by skyline131313 on 3/20/2024 in #fix-my-print
Corners Warping with ABS
yah I cleaned it every time I try something new and I try not to touch it otherwise
25 replies
RRCRat Rig Community [Unofficial]
•Created by skyline131313 on 3/20/2024 in #fix-my-print
Corners Warping with ABS
90mm x 75mm and 50mm height
25 replies
RRCRat Rig Community [Unofficial]
•Created by skyline131313 on 3/20/2024 in #fix-my-print
Corners Warping with ABS
Yah the fan is off for the first 2 layers and I tried lowering the fan, it was at 15%, going to 5% the layers start crumpling together
25 replies
RRCRat Rig Community [Unofficial]
•Created by skyline131313 on 3/20/2024 in #fix-my-print
Corners Warping with ABS
25 replies
RRCRat Rig Community [Unofficial]
•Created by skyline131313 on 3/6/2024 in #fix-my-printer
Hotend Heater going too high?
4 replies
RRCRat Rig Community [Unofficial]
•Created by skyline131313 on 2/23/2024 in #fix-my-printer
Bad First Layer Outside of Probed Area
Well I tried it and it was significantly worse, the side was the same and then it failed for spots it otherwise was able to do before.
11 replies
RRCRat Rig Community [Unofficial]
•Created by skyline131313 on 2/23/2024 in #fix-my-printer
Bad First Layer Outside of Probed Area
Well if I disable the fade then I'd just turn off bed meshing completely wouldn't I? Or did you reduce the amount of fading that is done? I think one of the settings do that
11 replies
RRCRat Rig Community [Unofficial]
•Created by skyline131313 on 2/23/2024 in #fix-my-printer
Bad First Layer Outside of Probed Area
I guess I could try putting 250mm as the max, but then I think will try to make a movement for the nozzle to 280mm, which would probably stop the printer
11 replies
RRCRat Rig Community [Unofficial]
•Created by skyline131313 on 2/23/2024 in #fix-my-printer
Bad First Layer Outside of Probed Area
That's what I already did. The probe is 3cm to the left of the hotend. The max is set to 220mm, I could maybe increase the x range the printer can move but physically there's only maybe 5mm of travel left, and that's with the toolhead gantry hitting the end.
11 replies
RRCRat Rig Community [Unofficial]
•Created by skyline131313 on 2/20/2024 in #ratos-support
ratos-configurator showing as invalid
I made sure to grab the offical one
25 replies
RRCRat Rig Community [Unofficial]
•Created by skyline131313 on 2/20/2024 in #ratos-support
ratos-configurator showing as invalid
I don't think so, I installed it last year in june
25 replies
RRCRat Rig Community [Unofficial]
•Created by skyline131313 on 2/20/2024 in #ratos-support
ratos-configurator showing as invalid
it's been like this from day 1 and I ran an integrity test before using it
25 replies