Raven 3D Tech
RRCRat Rig Community [Unofficial]
•Created by Raven 3D Tech on 1/5/2025 in #fix-my-printer
Z-Tilt is only adjusting one Axis.
Another day, another problem. I'm working hard to get my VzBot Triple-Z working on RatOS. The last thing is the Z-tilt. I have buzzed the motors to ensure they are in the proper sequence. Z = Front Left, Z1 = Back, and Z2 = Front Right. Homing is working fine, and Beacon initialisation was done with no problem. The issue with Z-Tilt is that Z2 keeps adjusting more and more, and neither does the other Z-Axis. I have swapped cables, and they are still the same. I just moved the problem to another axis. Sometimes, it looks like it is doing double on the Z2-Axis, like a double tap. You can see that in the video. I don’t know what to do, and it is so frustrating being so close and unable to get it to work. Maybe someone came across this and could share the solution. I have also added the printer.cfg and ratos.cfg.
24 replies
RRCRat Rig Community [Unofficial]
•Created by Raven 3D Tech on 1/3/2025 in #ratos-support
RatOS on AWD VzBot Triple Z motor configuration.
I Have a working AWD VzBot Triple Z. My thinking was to use the configurator, and choose Standard V-core 4 configuration and then in the printer.cfg add the additional 2 motors. All done and X and Z no issues but the Y is given me a lot of headaches as no matter what I change in the configuration it will not move in the right direction it only makes noises . I also add previous configuration to setting to it and still is no go for Y. What could be wrong. Is there something in RatOS that needs to be change or is a no go at all.
6 replies
RRCRat Rig Community [Unofficial]
•Created by Raven 3D Tech on 10/6/2024 in #ratos-support
Do you need to reflash your boards if you move to RatOS
I have a running VzBot triple Z and one to move to RatOS. My boards (Octopus v1.1 and SHT336 Pro(tmc5160) are flashed with lates Katapult and Klipper. All running CANBus. Do I still need to Flash the boards with the configurator, and if not, where are the uuid settings for the boards in RatOS.
5 replies