RatOS on AWD VzBot Triple Z motor configuration.
I Have a working AWD VzBot Triple Z. My thinking was to use the configurator, and choose Standard V-core 4 configuration and then in the printer.cfg add the additional 2 motors. All done and X and Z no issues but the Y is given me a lot of headaches as no matter what I change in the configuration it will not move in the right direction it only makes noises . I also add previous configuration to setting to it and still is no go for Y. What could be wrong. Is there something in RatOS that needs to be change or is a no go at all.
5 Replies
Problem is that awd and hybrid is different hybrid has additional 2 steppers for Y
Awd is additional steppers for x and Y
I just got it to work. Now I need to get Beacon to work and all done. I will not close this as I would like to report final findings and solutions to it.
X ,Y,Z is working now.
Well with beacon thats easy
Just follow the guide
And if you run a smooth pei
Go for the backside or the textured
Thanks for the information. Will do all tomorrow.
Just pick it as the probe in the configurator. See https://os.ratrig.com/docs/configuration/beacon_contact for calibration.
Beacon Contact | RatOS
- Prerequisites