ZIMZ
RRCRat Rig Community [Unofficial]
•Created by ZIMZ on 1/1/2025 in #fix-my-printer
Bed level issue - wave in my bed mesh and copy / mirror prints on T1 result in waaaaaay to low z
Hello. I believe I have an issue with my stock bed having a wave in it. Below see the images of the hot and cold bed meshes. This results in mirror and copy prints on T1 having waaaay to low of a z offset and making mirror / copy unusable. Any and all help would be appreciated. I think I might need a new bed.
16 replies
RRCRat Rig Community [Unofficial]
•Created by ZIMZ on 12/26/2024 in #fix-my-printer
Keenovo Heater pad not heating
Hello all, have any of you had issues with the heater pad not working? I finally got my v-core 4 idex running and had two prints and then the heater pad failed. I checked wiring and the SSR, the heater pad won't heat the bed. Started happening earlier today and not it just won't heat. Any ideas other than warranty?
9 replies
RRCRat Rig Community [Unofficial]
•Created by ZIMZ on 11/11/2024 in #fix-my-printer
Idex 500 has error when swapping toolheads to second color.
15 replies
RRCRat Rig Community [Unofficial]
•Created by ZIMZ on 11/11/2024 in #fix-my-printer
v-core 4 idex 500 error: Error evaluating 'gcode_macro START_PRINT:gcode': gcode.CommandError: Toolh
I can't figure out what setting to change. Everything is configured. Here is the error when I try to print from Prusa Slicer or OrcaSlicer
Error evaluating 'gcode_macro START_PRINT:gcode': gcode.CommandError: Toolhead x-offset is too high for the available parking space. Calibrate your X and DC endstop positions and make sure you stay below 1mm.
Endstops:
#---------------------------------------------------- X -----------------------------------------------------
The X axis motor for the left toolhead, located at the rear left of the printer
#------------------------------------------------------------------------------------------------------------
[stepper_x]
dir_pin: x_dir_pin # Add ! in front of pin name to reverse the direction of stepper_x
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
homing_speed: 50
position_min: -60.60
position_max: 500
position_endstop: -60.60
#---------------------------------------------- DUAL_CARRIAGE -----------------------------------------------
[dual_carriage]
dir_pin: dual_carriage_dir_pin # Add ! in front of pin name to reverse the direction of dual_carriage
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
position_min: 0
position_max: 563.8
position_endstop: 563.8
safe_distance: 55 [stepper_y] dir_pin: !y_dir_pin # Remove ! in front of pin name to reverse the direction of stepper_y rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys homing_speed: 50 position_min: -14.35 position_max: 533.65 position_endstop: -14.35 bed margins and parking [gcode_macro RatOS] variable_bed_margin_x: [60.6, 63.799999999999955] [gcode_macro T0] variable_parking_position: -58.6 Variable_loading_position: -35.6 [gcode_macro T1] variable_parking_position: 561.8 Variable_loading_position: 538.8
position_endstop: 563.8
safe_distance: 55 [stepper_y] dir_pin: !y_dir_pin # Remove ! in front of pin name to reverse the direction of stepper_y rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys homing_speed: 50 position_min: -14.35 position_max: 533.65 position_endstop: -14.35 bed margins and parking [gcode_macro RatOS] variable_bed_margin_x: [60.6, 63.799999999999955] [gcode_macro T0] variable_parking_position: -58.6 Variable_loading_position: -35.6 [gcode_macro T1] variable_parking_position: 561.8 Variable_loading_position: 538.8
49 replies
RRCRat Rig Community [Unofficial]
•Created by ZIMZ on 9/14/2024 in #fix-my-printer
H723 v1.1 Version Mismatch
7 replies