Synapsis
RRCRat Rig Community [Unofficial]
•Created by Synapsis on 8/28/2024 in #ratos-support
System Upgrade Error
That true but in my case some parts are not standard RatRig parts like my Z motors so I have to change the configuration slightly.
16 replies
RRCRat Rig Community [Unofficial]
•Created by Synapsis on 8/28/2024 in #ratos-support
System Upgrade Error
Is there a way to retrieve my printer.cfg from the SD card that I had to change for a new install. That card was not working so I could not connect via network to download it.
16 replies
RRCRat Rig Community [Unofficial]
•Created by Synapsis on 8/28/2024 in #ratos-support
System Upgrade Error
Copying the ratos.cfg wouldn't work then (seeing you said have to regenerate it) but does that mean I have to also re calibrate the beacon?
16 replies
RRCRat Rig Community [Unofficial]
•Created by Synapsis on 8/28/2024 in #ratos-support
System Upgrade Error
Just a question; can I use the printer cfg from the current setup or do I have to do a complete install and all the configs etc, like the beacon setup?
16 replies
RRCRat Rig Community [Unofficial]
•Created by Synapsis on 8/28/2024 in #ratos-support
System Upgrade Error
ok Thanks
16 replies
RRCRat Rig Community [Unofficial]
•Created by Synapsis on 8/28/2024 in #ratos-support
System Upgrade Error
After working yesterday doing to prints I shut down the printer. Today on starting the printer I get "Klipper has encountered an error Option "control" in section 'hearter-bed' nust be specified. on the touch screen of the printer. I can not connect to the printer as wifi is not working for some other reason. I tried via eth0 which i can ping but not connect to it. Will I have to reinstall?
16 replies
RRCRat Rig Community [Unofficial]
•Created by Synapsis on 8/28/2024 in #ratos-support
System Upgrade Error
Correct my bad.
16 replies
RRCRat Rig Community [Unofficial]
•Created by digisvein on 7/28/2024 in #ratos-support
Balena etcher fails on verification
👍
7 replies
RRCRat Rig Community [Unofficial]
•Created by digisvein on 7/28/2024 in #ratos-support
Balena etcher fails on verification
I had the same problem on three different Pcs , different cards and versions of Etcher. In the end I found Rufus worked perfectly the first time for me.
7 replies
RRCRat Rig Community [Unofficial]
•Created by Synapsis on 7/20/2024 in #ratos-support
pullup_resistor :ERROR
Yes V2.1, but its better to use the PT1000 as default and not via MAX31865, and thats after testing it in both mods.
61 replies
RRCRat Rig Community [Unofficial]
•Created by Synapsis on 7/22/2024 in #fix-my-mesh
MIN MAX BED
Ok all correct now just had to put in the right points.
4 replies
RRCRat Rig Community [Unofficial]
•Created by Synapsis on 7/20/2024 in #ratos-support
pullup_resistor :ERROR
Thanks, you guys know better so i will use it as a PT1000 and not MAX.
61 replies
RRCRat Rig Community [Unofficial]
•Created by Synapsis on 7/20/2024 in #ratos-support
pullup_resistor :ERROR
I only wanted to use it because i had read that it was more accurate, then I'll leave it as a PT1000. 🙂
61 replies
RRCRat Rig Community [Unofficial]
•Created by Synapsis on 7/20/2024 in #ratos-support
pullup_resistor :ERROR
So if any one else wants to use the MAX31865 it works. You should add it as a senor type.😀
61 replies
RRCRat Rig Community [Unofficial]
•Created by Synapsis on 7/20/2024 in #ratos-support
pullup_resistor :ERROR
👍 👍 Tried it and now it out and now it works. Talking about the pullup_resistor.
61 replies
RRCRat Rig Community [Unofficial]
•Created by Synapsis on 7/20/2024 in #ratos-support
pullup_resistor :ERROR
😀
61 replies
RRCRat Rig Community [Unofficial]
•Created by Synapsis on 7/20/2024 in #ratos-support
pullup_resistor :ERROR
yeah and use those. 👍
61 replies
RRCRat Rig Community [Unofficial]
•Created by Synapsis on 7/20/2024 in #ratos-support
pullup_resistor :ERROR
Great and thanks going to try that now.
61 replies
RRCRat Rig Community [Unofficial]
•Created by Synapsis on 7/20/2024 in #ratos-support
pullup_resistor :ERROR
the bltouch used the pinda mount thats why it worked.
61 replies
RRCRat Rig Community [Unofficial]
•Created by Synapsis on 7/20/2024 in #ratos-support
pullup_resistor :ERROR
61 replies