renatojd2010
RRCRat Rig Community [Unofficial]
•Created by renatojd2010 on 8/27/2024 in #ratos-support
Feed rate on Z axis from toolhead tab in Mainsail locks up lead screws
Hope that helps anyone
15 replies
RRCRat Rig Community [Unofficial]
•Created by renatojd2010 on 8/27/2024 in #ratos-support
Feed rate on Z axis from toolhead tab in Mainsail locks up lead screws
15 replies
RRCRat Rig Community [Unofficial]
•Created by renatojd2010 on 8/27/2024 in #ratos-support
Feed rate on Z axis from toolhead tab in Mainsail locks up lead screws
Cool. Thank you for your help
15 replies
RRCRat Rig Community [Unofficial]
•Created by renatojd2010 on 8/27/2024 in #ratos-support
Feed rate on Z axis from toolhead tab in Mainsail locks up lead screws
not in a while. I will do that now. I have Super Lube. That should work right?
15 replies
RRCRat Rig Community [Unofficial]
•Created by renatojd2010 on 8/27/2024 in #ratos-support
Feed rate on Z axis from toolhead tab in Mainsail locks up lead screws
15 replies
RRCRat Rig Community [Unofficial]
•Created by renatojd2010 on 8/27/2024 in #ratos-support
Feed rate on Z axis from toolhead tab in Mainsail locks up lead screws
Sure. I am printing something at the moment. When it's done I will do that
15 replies
RRCRat Rig Community [Unofficial]
•Created by renatojd2010 on 7/24/2024 in #ratos-support
Getting Incomplete Slicer Configuration detected
No problem. Thank you.
23 replies
RRCRat Rig Community [Unofficial]
•Created by renatojd2010 on 7/24/2024 in #ratos-support
Getting Incomplete Slicer Configuration detected
I should also say that it does print, and it does a Dynamic mesh.
23 replies
RRCRat Rig Community [Unofficial]
•Created by renatojd2010 on 7/24/2024 in #ratos-support
Getting Incomplete Slicer Configuration detected
I just added the skew profile last night. But with or without it I get the same message
23 replies
RRCRat Rig Community [Unofficial]
•Created by renatojd2010 on 7/24/2024 in #ratos-support
Getting Incomplete Slicer Configuration detected
23 replies
RRCRat Rig Community [Unofficial]
•Created by renatojd2010 on 8/1/2023 in #fix-my-mesh
New Plate is not flat
I sent it back and order one from RatRig. They said that they consider a variance below 0.4 mm to be within spec. So I am hoping it is
3 replies
RRCRat Rig Community [Unofficial]
•Created by ds makes⚡ on 5/21/2023 in #ratos-support
moonraker warnings
Ok. Thanks.
25 replies
RRCRat Rig Community [Unofficial]
•Created by ds makes⚡ on 5/21/2023 in #ratos-support
moonraker warnings
I tried installing beacon following the instruction on the beacon github
25 replies
RRCRat Rig Community [Unofficial]
•Created by ds makes⚡ on 5/21/2023 in #ratos-support
moonraker warnings
I do have a becon-klipper directory
25 replies
RRCRat Rig Community [Unofficial]
•Created by ds makes⚡ on 5/21/2023 in #ratos-support
moonraker warnings
pi@ratos:~ $ sudo ~/printer_data/config/RatOS/scripts/ratos-update.sh
Updating RatOS device symlinks..
###### Updating whitelisted commands
###### Updating service permissions
###### Installing beacon module...
beacon: beacon already installed, skipping...
###### Installing git hooks
###### Registering klippy extension 'ratos_homing_extension' with the RatOS Configurator...
{"id":null,"result":{"type":"data","data":{"json":true}}}Registered ratos_homing_extension successfully.
###### Symlinking klippy extensions
Symlinked 3/3 extension(s):
Symlink for "gcode_shell_command.py" already exists
Symlink for "ratos_homing.py" already exists
Symlink for "linear_movement_vibrations.py" already exists
###### Symlinking moonraker extensions
Symlinked 1/1 extension(s):
Symlink for "timelapse.py" already exists
25 replies
RRCRat Rig Community [Unofficial]
•Created by ds makes⚡ on 5/21/2023 in #ratos-support
moonraker warnings
I have the same issue. I ran the same command and it skipped installing beacon
25 replies
RRCRat Rig Community [Unofficial]
•Created by ds makes⚡ on 5/21/2023 in #ratos-support
moonraker warnings
cd ..
25 replies
RRCRat Rig Community [Unofficial]
•Created by renatojd2010 on 12/19/2022 in #fix-my-mesh
Need advise on how to fix this mesh
I'll have to look for that
7 replies
RRCRat Rig Community [Unofficial]
•Created by renatojd2010 on 12/19/2022 in #fix-my-mesh
Need advise on how to fix this mesh
Ok, ket me try that
7 replies
RRCRat Rig Community [Unofficial]
•Created by renatojd2010 on 12/19/2022 in #fix-my-mesh
Need advise on how to fix this mesh
7 replies