k1bbles
k1bbles
PostsComments
RRCRat Rig Community [Unofficial]
Created by k1bbles on 4/7/2025 in #fix-my-printer
IDEX layer shift
No description
11 replies
RRCRat Rig Community [Unofficial]
Created by k1bbles on 4/6/2025 in #fix-my-printer
IDEX Upgrade VCore 300
I just finished connecting in everything for the IDEX upgrade on my RR4 300 and when I go into configurator, select IDEX on the 300 and walk through it shows T0 twice, not T1 - at the end I can't create the config because it doesn't know about axis 1. I checked on the pi and I can see both toolboards so not sure what's going on. 
pi@Ratatoskr:~ $ lsusb
Bus 002 Device 002: ID 2109:0817 VIA Labs, Inc. USB3.0 Hub             
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 012: ID 1d50:614e OpenMoko, Inc. stm32g0b1xx
Bus 001 Device 004: ID 1d50:614e OpenMoko, Inc. stm32g0b1xx
Bus 001 Device 008: ID 04d8:e72b Microchip Technology, Inc. Beacon RevH
Bus 001 Device 010: ID 1d50:614e OpenMoko, Inc. stm32f446xx
Bus 001 Device 006: ID 046d:08e5 Logitech, Inc. HD Pro Webcam C920
Bus 001 Device 003: ID 2109:2817 VIA Labs, Inc. USB2.0 Hub             
Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
pi@Ratatoskr:~ $ lsusb
Bus 002 Device 002: ID 2109:0817 VIA Labs, Inc. USB3.0 Hub             
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 012: ID 1d50:614e OpenMoko, Inc. stm32g0b1xx
Bus 001 Device 004: ID 1d50:614e OpenMoko, Inc. stm32g0b1xx
Bus 001 Device 008: ID 04d8:e72b Microchip Technology, Inc. Beacon RevH
Bus 001 Device 010: ID 1d50:614e OpenMoko, Inc. stm32f446xx
Bus 001 Device 006: ID 046d:08e5 Logitech, Inc. HD Pro Webcam C920
Bus 001 Device 003: ID 2109:2817 VIA Labs, Inc. USB2.0 Hub             
Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
So the toolboard is recognized by the pi but ratos doesn't seem to see it?
18 replies
RRCRat Rig Community [Unofficial]
Created by k1bbles on 7/30/2024 in #fix-my-printer
Strange clicking sound on moves VCore4 300 Hybrid
See video below - the right side motor assembly seems to be making a periodic clicking noise. I'm waiting for this print to complete to try to locate it but I don't see anything obvious that would be causing it. There's no rattling, it's not any cable banging on moves and it seems to be more on toolhead movements (X) than on the Y axis. Just wondering if anyone has any ideas on what this could be. My resonance on corexy is spot on and my input shaper in hybrid is solid.
12 replies
RRCRat Rig Community [Unofficial]
Created by k1bbles on 7/27/2024 in #fix-my-resonance
VC4 300 frequency response
No description
20 replies
RRCRat Rig Community [Unofficial]
Created by k1bbles on 7/25/2024 in #fix-my-mesh
VCore4 300 Hybrid
No description
11 replies