Supercrossed
RRCRat Rig Community [Unofficial]
•Created by Supercrossed on 8/17/2024 in #fix-my-print
vcore 3.1 PACF woes
8 replies
RRCRat Rig Community [Unofficial]
•Created by Supercrossed on 8/17/2024 in #fix-my-print
vcore 3.1 PACF woes
Why would it only be happening with this type of filament?
8 replies
RRCRat Rig Community [Unofficial]
•Created by Supercrossed on 8/17/2024 in #fix-my-print
vcore 3.1 PACF woes
I have my first layer and top surface line width set to 0.7mm, will try 0.6
8 replies
RRCRat Rig Community [Unofficial]
•Created by Supercrossed on 6/14/2024 in #fix-my-print
extrusion issues
May have been print setting related. I tried to keep the settings 1:1 of what I use on my K1 with this same filament but it did not want to play nice
22 replies
RRCRat Rig Community [Unofficial]
•Created by Supercrossed on 6/14/2024 in #fix-my-print
extrusion issues
22 replies
RRCRat Rig Community [Unofficial]
•Created by Supercrossed on 6/14/2024 in #fix-my-print
extrusion issues
Adjust first layer height to 0.3mm, line width to 0.75 (0.6mm nozzle) and this seems to work well for this filament
22 replies
RRCRat Rig Community [Unofficial]
•Created by Supercrossed on 6/14/2024 in #fix-my-print
extrusion issues
This filament is very runny and ooz-y. I'm printing 0.3mm layers with 0.2mm first layer.
22 replies
RRCRat Rig Community [Unofficial]
•Created by Supercrossed on 6/14/2024 in #fix-my-print
extrusion issues
22 replies
RRCRat Rig Community [Unofficial]
•Created by Supercrossed on 6/14/2024 in #fix-my-print
extrusion issues
CFPC
22 replies
RRCRat Rig Community [Unofficial]
•Created by Supercrossed on 6/15/2024 in #fix-my-resonance
Opinion on these graphs
Will adjust all belts and retension to run the test again
20 replies
RRCRat Rig Community [Unofficial]
•Created by Supercrossed on 6/15/2024 in #fix-my-resonance
Opinion on these graphs
I'll re align everything. The X gantry is extremely smooth moving by hand but moving the Y axis by hand is very rough and grind-y
20 replies
RRCRat Rig Community [Unofficial]
•Created by Supercrossed on 6/14/2024 in #fix-my-print
extrusion issues
Seems to be ok now
22 replies
RRCRat Rig Community [Unofficial]
•Created by Supercrossed on 6/14/2024 in #fix-my-print
extrusion issues
Also was not using the bed heater since I was testing parts step by step after the build
22 replies
RRCRat Rig Community [Unofficial]
•Created by Supercrossed on 6/14/2024 in #fix-my-print
extrusion issues
I did z tilt, re leveled the bed
22 replies
RRCRat Rig Community [Unofficial]
•Created by Supercrossed on 6/15/2024 in #fix-my-resonance
Opinion on these graphs
The Y rails seem to have some binding/grinding. Reached out to fabreeko about them but been trying to fix them in the meantime
20 replies
RRCRat Rig Community [Unofficial]
•Created by Supercrossed on 6/15/2024 in #fix-my-resonance
Opinion on these graphs
Adxl is the beacon H
20 replies
RRCRat Rig Community [Unofficial]
•Created by Supercrossed on 6/15/2024 in #fix-my-resonance
Opinion on these graphs
20 replies
RRCRat Rig Community [Unofficial]
•Created by Supercrossed on 6/15/2024 in #fix-my-resonance
Opinion on these graphs
How do you mean? The umbilical in this case is a USB toolhead board and cpap fan
20 replies
RRCRat Rig Community [Unofficial]
•Created by Supercrossed on 6/14/2024 in #fix-my-print
extrusion issues
I haven't, I'll try that too
22 replies
RRCRat Rig Community [Unofficial]
•Created by Supercrossed on 6/14/2024 in #fix-my-print
extrusion issues
Offset as in Z offset, or flow?
22 replies