tmicke
RRCRat Rig Community [Unofficial]
ā¢Created by Supercrossed on 6/14/2024 in #fix-my-print
extrusion issues
Have you tried heat soaking it? I have to heat soak my vc3-500 for 45-60 minutes before printing. Do a search for heat soak, Iām not great at explaining.
22 replies
RRCRat Rig Community [Unofficial]
ā¢Created by tmicke on 6/15/2023 in #ratos-support
4028 fan configuration (again, sorry)
If it can help anyone else I did what Helge said and entered this in my config:
[fan]
pin: !PA8
cycle_time: 0.01
enable_pin: PA3
Now it all works like a charm š„³
32 replies
RRCRat Rig Community [Unofficial]
ā¢Created by tmicke on 6/15/2023 in #ratos-support
4028 fan configuration (again, sorry)
Ok, I'll give it another go, thanks!
32 replies
RRCRat Rig Community [Unofficial]
ā¢Created by tmicke on 6/15/2023 in #ratos-support
4028 fan configuration (again, sorry)
so i should not look at the picture in the guide?
32 replies
RRCRat Rig Community [Unofficial]
ā¢Created by tmicke on 6/15/2023 in #ratos-support
4028 fan configuration (again, sorry)
I mean no offence, but it's so easy when you know how... I don't.
32 replies
RRCRat Rig Community [Unofficial]
ā¢Created by tmicke on 6/15/2023 in #ratos-support
4028 fan configuration (again, sorry)
The two bottom blue boxes says the axact same thing?
32 replies
RRCRat Rig Community [Unofficial]
ā¢Created by tmicke on 6/15/2023 in #ratos-support
4028 fan configuration (again, sorry)
Obviously I'm missing a whole lot..
32 replies
RRCRat Rig Community [Unofficial]
ā¢Created by tmicke on 6/15/2023 in #ratos-support
4028 fan configuration (again, sorry)
But that's the page I'm reffering to...
32 replies
RRCRat Rig Community [Unofficial]
ā¢Created by tmicke on 6/15/2023 in #ratos-support
4028 fan configuration (again, sorry)
I think I might have a condition with a lot of letters in it, but it gets me confused when showing a picture of one thing and the saying I should connect one to a heater...
32 replies
RRCRat Rig Community [Unofficial]
ā¢Created by tmicke on 6/15/2023 in #ratos-support
4028 fan configuration (again, sorry)
example..
32 replies
RRCRat Rig Community [Unofficial]
ā¢Created by tmicke on 6/15/2023 in #ratos-support
4028 fan configuration (again, sorry)
Hi Helge, thank you.
But could I trouble you for a exaple code, what exatly to write in printer.cfg file cus I just dom't get it.
32 replies
RRCRat Rig Community [Unofficial]
ā¢Created by firm-tan on 3/12/2023 in #ratos-support
RatOs 2.0 installed - lost PI touchscreen
Thank you!
55 replies
RRCRat Rig Community [Unofficial]
ā¢Created by equal-aqua on 3/12/2023 in #ratos-support
RatOs 2.0 installed - lost PI touchscreen
It worked š
55 replies
RRCRat Rig Community [Unofficial]
ā¢Created by extended-salmon on 3/12/2023 in #ratos-support
RatOs 2.0 installed - lost PI touchscreen
Nice, I hope this can benefit us all and that it isn't to much extra work for you
55 replies
RRCRat Rig Community [Unofficial]
ā¢Created by conservative-teal on 3/12/2023 in #ratos-support
RatOs 2.0 installed - lost PI touchscreen
With the second one, dtoverlay=vc4-fkms-v3d, the screen didn't turn on, printer was accessible via Web UI
55 replies
RRCRat Rig Community [Unofficial]
ā¢Created by dependent-tan on 3/12/2023 in #ratos-support
RatOs 2.0 installed - lost PI touchscreen
With the first one, dtoverlay=vc4-kms-v3d, the screen came on but no touch, printer was accessible via Web UI
55 replies
RRCRat Rig Community [Unofficial]
ā¢Created by like-gold on 3/12/2023 in #ratos-support
RatOs 2.0 installed - lost PI touchscreen
Just to be sure I did it right; I put the SD card in my computer and added that line just above the [All] line. I have a Mac and used Visual Studio Code
55 replies
RRCRat Rig Community [Unofficial]
ā¢Created by generous-apricot on 3/12/2023 in #ratos-support
RatOs 2.0 installed - lost PI touchscreen
If there is anything I can provide that is of any help please let me know..
55 replies
RRCRat Rig Community [Unofficial]
ā¢Created by conventional-tan on 3/12/2023 in #ratos-support
RatOs 2.0 installed - lost PI touchscreen
It appears as the 64bit was no better than the 32bit in this regard..
55 replies
RRCRat Rig Community [Unofficial]
ā¢Created by continuing-cyan on 3/12/2023 in #ratos-support
RatOs 2.0 installed - lost PI touchscreen
No hotspot anywhere š¦ Not on my phone, not on my computer and not on my iPad, I waited more than 30 minutes. I shut down my pi and disconnected the screen, started the Pi again and then the hotspot came and I could do the setup. From the browser on my computer I then made all the updates, RatOS first, then shut the printer down, connected the screen and started the Pi and the touch is gone...
55 replies