elpoepel Comments - Answer Overflow

elpoepel

Posts Comments

RRCRat Rig Community [Unofficial]

•Created by Robee on 9/20/2024 in #fix-my-printer

Timer too close on V-Core 3.0 500 with Klipper

Can you post the new klippy.log?

16 replies

RRCRat Rig Community [Unofficial]

•Created by hedj on 9/22/2024 in #fix-my-printer

ebb36 1.2 heater always on

Remove the heater from the Board, Power on the Board and check the heater Port with a Multimeter. Disable the heater in your printer.cfg, is it still on? Check with Multimeter.

7 replies

RRCRat Rig Community [Unofficial]

•Created by Robee on 9/20/2024 in #fix-my-printer

Timer too close on V-Core 3.0 500 with Klipper

That's great, happy printing

16 replies

RRCRat Rig Community [Unofficial]

•Created by Robee on 9/20/2024 in #fix-my-printer

Timer too close on V-Core 3.0 500 with Klipper

if this is all set, try another usb cable for the toolboard

16 replies

RRCRat Rig Community [Unofficial]

•Created by Robee on 9/20/2024 in #fix-my-printer

Timer too close on V-Core 3.0 500 with Klipper

its in your log `Unable to obtain tmc extruder phase´

16 replies

RRCRat Rig Community [Unofficial]

•Created by Robee on 9/20/2024 in #fix-my-printer

Timer too close on V-Core 3.0 500 with Klipper

Did you set your tmc jumper? are the motor wires correct? https://os.ratrig.com/docs/boards/btt/octopus-11/

16 replies

RRCRat Rig Community [Unofficial]

•Created by jb02877 on 9/20/2024 in #fix-my-printer

Temperature Wait issue

you can disable it with variable_preheat_extruder False, i do not recommend it

6 replies

RRCRat Rig Community [Unofficial]

•Created by jb02877 on 9/20/2024 in #fix-my-printer

Temperature Wait issue

https://os.ratrig.com/docs/configuration/macros/#heating

6 replies

RRCRat Rig Community [Unofficial]

•Created by jb02877 on 9/20/2024 in #fix-my-printer

Temperature Wait issue

i guess it is the variable_preheat_extruder_temp

6 replies

RRCRat Rig Community [Unofficial]

•Created by 03Julian04 on 9/18/2024 in #fix-my-printer

Need help please: „Error during homing contact: Contact triggered while accelerating“ /RatRig V4 500

Okay ignore my first attemp. What is your max_z_accel? Change it to 30 and try again

10 replies

RRCRat Rig Community [Unofficial]

•Created by jb02877 on 9/17/2024 in #fix-my-printer

Can I use a creality adxl345 accelerometer for my DIY ratrig 4?

Connect it to your pi, login into the pi with User pi password raspberry. Execute command ls /dev/serial/by-id/* You get your mcu and the adxl in return Add the adxl in your printer.cfg Example