Steef
RRCRat Rig Community [Unofficial]
•Created by Steef on 12/8/2024 in #ratos-support
RatOS Slicer configuration - conflicting advice in documentation
All,
The slicer configuration on the website:
https://os.ratrig.com/docs/slicers/
And the slicer configuration that RatOS links you to if it detects an incomplete configuration:
https://github.com/HelgeKeck/RatOS/blob/documentation_v2.1/site/docs/slicers.md
Currently do not provide the same advice. Which should be followed? Also, it seems beneficial to give uniform advice (only one refers to relative E, the start macro is different etc)
5 replies
RRCRat Rig Community [Unofficial]
•Created by Steef on 9/26/2023 in #fix-my-resonance
Belt tension check
18 replies
RRCRat Rig Community [Unofficial]
•Created by Steef on 2/7/2023 in #fix-my-printer
VCore 3.1 resonance on horizontal moves
My newly built 3.1 doesn't seem to like horizontal moves, but seems much happier on diagonals (I just realized the stepper speeds up for diagonals, so could just be due to the speed of the stepper).
https://youtu.be/vYWcLRGib8c
The above video is at 75 mm/s using spreadcycle, so no stealthchop applied here. I have tried the "fix" involving switching stepper poles and inverting the direction, but that seems to have no effect.
This is using the "basic" profile (1.1a run current) on the new RatOS V2 beta.
I have removed anything i could from the tool head in order to limit things vibrating along with the resonances, but it seems to originate from the steppers / belts. It doesn't seem to change with belt tension.
What would be my next step here?
30 replies
RRCRat Rig Community [Unofficial]
•Created by Steef on 2/3/2023 in #fix-my-printer
Bed temperature not stable (Keenovo 157 220V 600W)
46 replies