Tavidar
RRCRat Rig Community [Unofficial]
•Created by Tavidar on 12/17/2024 in #fix-my-print
Extrusion flow issue VCore 4
Just got through commissioning, first build from a kit, and everything is as square and tuned as I can get it mechanically. I'm not sure what to try to troubleshoot this.
First layers look good, then things go off the rails when I start hitting layers with infill. Remarkably, once past those layers the print continues like it never had a problem. I've tried a few (dry) filaments, and no improvement.
I'm using Prusa Slicer with Generic PLA presets.
7 replies
RRCRat Rig Community [Unofficial]
•Created by Tavidar on 12/12/2024 in #fix-my-printer
Install options in RatOs 2.1.0 RC2 - no V-Core 4
Hi, I'm configuring RatOs for my new V-Core 4 500 build, and this machine is not listed as supported. Is there a link to a template for the neccessary printer.cfg file? I chose the V-core 3 given a lack of options, but noticed that the y-stop is in a different position on the Core 4, and i'm probably going down the wrong path.
I read the documentation, but the Core 4 is not listed as a supported device
https://os.ratrig.com/docs/introduction
What the heck am i supposed to do here?
Thanks!
8 replies