Install options in RatOs 2.1.0 RC2 - no V-Core 4
Hi, I'm configuring RatOs for my new V-Core 4 500 build, and this machine is not listed as supported. Is there a link to a template for the neccessary printer.cfg file? I chose the V-core 3 given a lack of options, but noticed that the y-stop is in a different position on the Core 4, and i'm probably going down the wrong path.
I read the documentation, but the Core 4 is not listed as a supported device
https://os.ratrig.com/docs/introduction
What the heck am i supposed to do here?
Thanks!
What is RatOS? | RatOS
RatOS is a preconfigured Raspberry Pi image that aims to make it as painless as possible to get Klipper, Moonraker, Mainsail and KlipperScreen up and running on your printer, via an easy to use, modular configuration. It is developed and maintained by Mikkel Schmidt (miklschmidt#2036 on the Rat Rig Unofficial Discord).
Solution:Jump to solution
you are looking at the 2.0 documentation. The 2.1 documentation has not been published yet. If you are using ratos-2.1 vcore4 is supported
5 Replies
Solution
you are looking at the 2.0 documentation. The 2.1 documentation has not been published yet. If you are using ratos-2.1 vcore4 is supported
I'm using RatOs 2.1.0, but there is no configuration file for the vcore 4
what does that mean? You use the configurator to generate your config
Like blacksmith pointed out, you should be using the configurator but the IN PROGRESS documentation is here for now
https://github.com/HelgeKeck/RatOS/tree/documentation_v2.1/site/docs
Thanks all, i had downloaded both versions but flashed the wrong one, once i was in the configurator things went pretty smooth!