Snoopy31195
RRCRat Rig Community [Unofficial]
•Created by Snoopy31195 on 2/23/2024 in #fix-my-printer
Belt issues
I replaced the damaged belt and assembled everything with the top piece of the motor mounts off using nuts and shorter screws to hold everything in place. I adjust some parts and it seems like nothing is rubbing now. Just a question of what chewed up the belt in that one spot
3 replies
RRCRat Rig Community [Unofficial]
•Created by exotic-emerald on 7/14/2023 in #fix-my-printer
Heating start directly with start of printer
Just making sure, this is not one of the boards that got shorted, right?
15 replies
RRCRat Rig Community [Unofficial]
•Created by Snoopy31195 on 5/17/2023 in #fix-my-printer
Extracting broken CHF nozzle from Phaetus rapido
4 replies
RRCRat Rig Community [Unofficial]
•Created by Snoopy31195 on 4/30/2023 in #fix-my-print
Underextrusion even with high extrusion multiplier
no issues now. Oribiter-1004 and orbiter 2 are identical other than metadata as they both load orbiter.cfg then the 1004ahg stepper. I just orbiter-1004 as it was already in printer.cfg
12 replies
RRCRat Rig Community [Unofficial]
•Created by Snoopy31195 on 4/30/2023 in #fix-my-print
Underextrusion even with high extrusion multiplier
Temps helped. But turns out the main things were that I had not changed extrusion to relative in printer.cfg as it is set in prusa and super slicer. Also had selected orbiter and not orbiter-1004. Now not having any underextrusion at 240, EM of 1.0 at 15-20mm^3 so far. Just posting this in case someone else has similar issues
12 replies
RRCRat Rig Community [Unofficial]
•Created by Snoopy31195 on 4/30/2023 in #fix-my-print
Underextrusion even with high extrusion multiplier
12 replies
RRCRat Rig Community [Unofficial]
•Created by Snoopy31195 on 4/30/2023 in #fix-my-print
Underextrusion even with high extrusion multiplier
12 replies
RRCRat Rig Community [Unofficial]
•Created by Snoopy31195 on 4/30/2023 in #fix-my-print
Underextrusion even with high extrusion multiplier
12 replies
RRCRat Rig Community [Unofficial]
•Created by Snoopy31195 on 4/30/2023 in #fix-my-print
Underextrusion even with high extrusion multiplier
12 replies
RRCRat Rig Community [Unofficial]
•Created by Snoopy31195 on 4/30/2023 in #fix-my-print
Underextrusion even with high extrusion multiplier
12 replies
RRCRat Rig Community [Unofficial]
•Created by Snoopy31195 on 4/30/2023 in #fix-my-print
Underextrusion even with high extrusion multiplier
These are cubes printer in superslicer with either 1x or 1.2x EM and 205 or 215 deg. The 1.2x look better than the 1x and the 215 look better than the 205 in person, but still have visible under extrustion.
12 replies
RRCRat Rig Community [Unofficial]
•Created by Quinny on 4/30/2023 in #fix-my-printer
X/Y axis not even
6 replies