rwoculus
RRCRat Rig Community [Unofficial]
•Created by rwoculus on 6/10/2024 in #ratos-support
Unknown gcode_macro variable 'color'
11 replies
RRCRat Rig Community [Unofficial]
•Created by rwoculus on 6/10/2024 in #ratos-support
Unknown gcode_macro variable 'color'
[gcode_macro T0]
variable_color: 'FFF'
[gcode_macro T1]
variable_color: 'FFF'
[gcode_macro T2] variable_color: 'FFF' [gcode_macro T3] variable_color: 'FFF' [gcode_macro T4] variable_color: 'FFF'
[gcode_macro T2] variable_color: 'FFF' [gcode_macro T3] variable_color: 'FFF' [gcode_macro T4] variable_color: 'FFF'
11 replies
RRCRat Rig Community [Unofficial]
•Created by rwoculus on 6/10/2024 in #ratos-support
Unknown gcode_macro variable 'color'
I put this in my gcode
11 replies
RRCRat Rig Community [Unofficial]
•Created by rwoculus on 6/10/2024 in #ratos-support
Unknown gcode_macro variable 'color'
Ok tnx will try that tomorrow
11 replies
RRCRat Rig Community [Unofficial]
•Created by rwoculus on 6/10/2024 in #ratos-support
Unknown gcode_macro variable 'color'
I now put in the old load and unload macros from 2.0 that seems to work fine.
11 replies
RRCRat Rig Community [Unofficial]
•Created by rwoculus on 6/10/2024 in #ratos-support
Unknown gcode_macro variable 'color'
I could use some advise on how to do that.
11 replies
RRCRat Rig Community [Unofficial]
•Created by rwoculus on 6/10/2024 in #ratos-support
Unknown gcode_macro variable 'color'
this is the log
11 replies
RRCRat Rig Community [Unofficial]
•Created by rwoculus on 10/26/2023 in #ratos-support
Temporarely change bed size while running maco.
ok tnx made a workaround.
7 replies
RRCRat Rig Community [Unofficial]
•Created by rgomez2003 on 3/28/2023 in #fix-my-mesh
inconsistent and unreliable bed mesh need help please
I have the exact dame issue. Every time i reprint my Z is off by .07
17 replies
RRCRat Rig Community [Unofficial]
•Created by fascinating-indigo on 2/20/2023 in #fix-my-mesh
First Layer problem, always squished on bottom left/ left side
10x10cm
37 replies
RRCRat Rig Community [Unofficial]
•Created by other-emerald on 2/20/2023 in #fix-my-mesh
First Layer problem, always squished on bottom left/ left side
I had this issue on both ratos 1.0 as now 2.0 all i changed from stock config is z-offset 8.4
37 replies
RRCRat Rig Community [Unofficial]
•Created by ratty-blush on 2/20/2023 in #fix-my-mesh
First Layer problem, always squished on bottom left/ left side
ok i don't see any movement on a 10x10 print
37 replies
RRCRat Rig Community [Unofficial]
•Created by national-gold on 2/20/2023 in #fix-my-mesh
First Layer problem, always squished on bottom left/ left side
Any fixes for this i have the exact same issue i already have the dual gantry mod.
37 replies