DikkieKlijn
RRCRat Rig Community [Unofficial]
•Created by DikkieKlijn on 1/14/2025 in #fix-my-print
Very ugly overhangs
I was already doing inner/outer perimiters. Thank you for a nudge in the right direction got them printing nicely now after maxing out my fanspeed and increasing the minimum layer time drasticly to 3.5sec. Seems i need some really good auxilery partcooling fans.
5 replies
RRCRat Rig Community [Unofficial]
•Created by DikkieKlijn on 4/17/2024 in #ratos-support
BTT kraken support.
Ill be pushing them as fast as I can for prolonged prints, all steppers are actively cooled. Nobody told me to me to get more driver cooling, that's my own preference 🙂
Interesting what you mention on the 2804's vs 2504AC's I do have a set of the 2504AC's laying around so I'll experiment with them. Flowrate will not be a problem for this printer though, I'm running a custom extruder/hotend combo that should be able to push around 150mm3/s, I'll show more on that in due time.
24 replies
RRCRat Rig Community [Unofficial]
•Created by DikkieKlijn on 4/17/2024 in #ratos-support
BTT kraken support.
It's a custom V-Core 3.1 AWD machine. Running 48v, on LDO super powers. I mainly chose this board over the Octopus due to the better cooling of the stepper drivers without resorting to external drivers (which would in turn increase complexity).
24 replies