swdee
RRCRat Rig Community [Unofficial]
•Created by swdee on 12/28/2023 in #fix-my-resonance
Trying to tune Vcore 400mm
46 replies
RRCRat Rig Community [Unofficial]
•Created by swdee on 12/28/2023 in #fix-my-resonance
Trying to tune Vcore 400mm
Axes noise for xy-axis accelerometer: 20.746252 (x), 18.938507 (y), 47.780332 (z)
Axes noise for xy-axis accelerometer: 21.558181 (x), 19.457533 (y), 53.079426 (z)
accelerometer values (x, y, z): -296.082377, -9178.553681, 1685.410096
accelerometer values (x, y, z): 0.000000, -9104.533087, 1302.362347
46 replies
RRCRat Rig Community [Unofficial]
•Created by swdee on 12/28/2023 in #fix-my-resonance
Trying to tune Vcore 400mm
New accelerator sensor finally turned up and this one actually works and I am now getting data which looks similar to what it should be doing.
46 replies
RRCRat Rig Community [Unofficial]
•Created by swdee on 12/28/2023 in #fix-my-resonance
Trying to tune Vcore 400mm
ok, thanks for that... i'll wait for the new one to arrive and re-test
46 replies
RRCRat Rig Community [Unofficial]
•Created by swdee on 12/28/2023 in #fix-my-resonance
Trying to tune Vcore 400mm
I tried tieing down the cables but it did not make any difference unfortunately.
46 replies
RRCRat Rig Community [Unofficial]
•Created by swdee on 12/28/2023 in #fix-my-resonance
Trying to tune Vcore 400mm
Ran them twice for comparison. I am not sure what the ranges should be, I did see online the noise axes should be in rang of 1-100.... hence those zero values maybe an issue?
46 replies
RRCRat Rig Community [Unofficial]
•Created by swdee on 12/28/2023 in #fix-my-resonance
Trying to tune Vcore 400mm
accelerometer values (x, y, z): -151594.176922, -3034.844362, 156819.748441
accelerometer values (x, y, z): -151594.176922, -2886.803174, 156819.748441
Axes noise for xy-axis accelerometer: 0.000000 (x), 87.583522 (y), 0.000000 (z)
Axes noise for xy-axis accelerometer: 0.000000 (x), 87.162055 (y), 0.000000 (z)
46 replies
RRCRat Rig Community [Unofficial]
•Created by swdee on 12/28/2023 in #fix-my-resonance
Trying to tune Vcore 400mm
I was wondering if the sensor could be bad also so brought another one, hopefully it will arrive in the next few days. Running those commands gives me the following output;
46 replies
RRCRat Rig Community [Unofficial]
•Created by swdee on 12/28/2023 in #fix-my-resonance
Trying to tune Vcore 400mm
46 replies
RRCRat Rig Community [Unofficial]
•Created by swdee on 12/28/2023 in #fix-my-resonance
Trying to tune Vcore 400mm
46 replies
RRCRat Rig Community [Unofficial]
•Created by swdee on 12/28/2023 in #fix-my-resonance
Trying to tune Vcore 400mm
Yes, both belts produce the same shaped spectroid graph. I have made a video running the belt tension macro, I do hear buzzing/vibrating but I kind of expect it does that too a certain degree versus rattling of a loose bolt for example. https://youtu.be/csMBvypBn_Q
46 replies
RRCRat Rig Community [Unofficial]
•Created by swdee on 12/28/2023 in #fix-my-resonance
Trying to tune Vcore 400mm
46 replies
RRCRat Rig Community [Unofficial]
•Created by swdee on 12/28/2023 in #fix-my-resonance
Trying to tune Vcore 400mm
Yes I have checked the accelerometer is tight and all other screws on the EVA head (and the frame too).
46 replies
RRCRat Rig Community [Unofficial]
•Created by swdee on 12/28/2023 in #fix-my-resonance
Trying to tune Vcore 400mm
Yes, I have watched that video, but it doesn't provide me with any ideas of what to do.
46 replies
RRCRat Rig Community [Unofficial]
•Created by swdee on 12/28/2023 in #fix-my-resonance
Trying to tune Vcore 400mm
Looking at other peoples graphs the belt tension from 0 to 25 Hz is always pretty flat, but on mine its high straight away. What does that mean?
46 replies
RRCRat Rig Community [Unofficial]
•Created by swdee on 12/28/2023 in #fix-my-resonance
Trying to tune Vcore 400mm
Still not sure if this is any good or not. Secondly I don't understand why the resonances_X graph shows no X or X+Y+Z lines?
46 replies
RRCRat Rig Community [Unofficial]
•Created by swdee on 12/28/2023 in #fix-my-resonance
Trying to tune Vcore 400mm
46 replies
RRCRat Rig Community [Unofficial]
•Created by swdee on 12/23/2023 in #fix-my-print
Manual Input Shaper Calibration Print Problems
15 replies
RRCRat Rig Community [Unofficial]
•Created by swdee on 12/23/2023 in #fix-my-print
Manual Input Shaper Calibration Print Problems
Yeah, I have an ADXL on order so when it arrives will be using that. However still trying to get things tuned as best I can for now.
15 replies
RRCRat Rig Community [Unofficial]
•Created by swdee on 12/23/2023 in #fix-my-print
Manual Input Shaper Calibration Print Problems
15 replies