eschaos1
RRCRat Rig Community [Unofficial]
•Created by eschaos1 on 3/21/2024 in #fix-my-printer
Ceramic heater not feeding filament through
2 replies
RRCRat Rig Community [Unofficial]
•Created by eschaos1 on 3/15/2024 in #ratos-support
Bond Tech Extruder binding
I’m having issues with the bond tech extruder binding. I took apart the entire extruder assembly and nothing appeared clogged, so I cleared out everything and reassembled. The bond tech still fails to extrude material. Is this likely a bondtech issue or is the system jammed somehow?
5 replies
RRCRat Rig Community [Unofficial]
•Created by eschaos1 on 12/5/2023 in #ratos-support
Bondtech gear clicking
I’m having an issue with the bondtech gear clicking not extruding more filament. I’ve the printer for PETG, printing at 235 degrees Celsius, mesh comes out good, paper test worked great for extruder nozzle to bed distance being good, but the filament gets stuck in the hot end.
Now it’s unable to print anymore filament. What’s the best way to clear out the filament? I’ve tried enabling the bondtech to pull out filament by flipping the Bondtech switch, but it won’t let me pull anything out. #stuckfilament #bondtechgearclicking #filamentstuckinhotend
2 replies
RRCRat Rig Community [Unofficial]
•Created by eschaos1 on 11/8/2023 in #ratos-support
Homing causing drifting?
I’m having an issue where homing the printer causes the opposite axes to get offset. The offset gets worse after each homing. Including both independent x, y homing as well as the home all function, it creates an offset.
For example, after the printer homes x and attempts to return position, it offsets in the y direction. Similarly, after homing in y, and it returns to the centered position, it gets offset in x.
Is this because of uneven belt tension?
Any suggestions on how to home to center and not create offsets? (Essentially there is drifting when homing)
34 replies