BRS-ENGINEERING-Florent Broise
RRCRat Rig Community [Unofficial]
•Created by R34Pr on 4/5/2024 in #fix-my-resonance
VC3.1 500mm Enc 2.0 BRS AWD Ti Gantry Tube Belt Tension
in practice some other parameters can slightly modify the results minus or less a small margin of error. My method works with the margin of error of the frequecy mesurement tool and the reading you are making of it. The PF tool lock the extra parameters away so it may be a bit better, less reading errors (?) I cant tell I have not used it 😉
115 replies
RRCRat Rig Community [Unofficial]
•Created by R34Pr on 4/5/2024 in #fix-my-resonance
VC3.1 500mm Enc 2.0 BRS AWD Ti Gantry Tube Belt Tension
Theoratically
115 replies
RRCRat Rig Community [Unofficial]
•Created by R34Pr on 4/5/2024 in #fix-my-resonance
VC3.1 500mm Enc 2.0 BRS AWD Ti Gantry Tube Belt Tension
The method is different, the result should aim the same final range 😉
115 replies
RRCRat Rig Community [Unofficial]
•Created by R34Pr on 4/5/2024 in #fix-my-resonance
VC3.1 500mm Enc 2.0 BRS AWD Ti Gantry Tube Belt Tension
115 replies
RRCRat Rig Community [Unofficial]
•Created by R34Pr on 4/5/2024 in #fix-my-resonance
VC3.1 500mm Enc 2.0 BRS AWD Ti Gantry Tube Belt Tension
Yes because in the formula Im giving you, wer are aiming to transform a frequecy into a tension, on a unit level. The PF tool use a lever system, with a pulley transformation so you mesure a force going on 2 both side
115 replies
RRCRat Rig Community [Unofficial]
•Created by R34Pr on 4/5/2024 in #fix-my-resonance
VC3.1 500mm Enc 2.0 BRS AWD Ti Gantry Tube Belt Tension
you can see the formula applied here https://github.com/FlorentBroise/BRS-Printers-Mod/blob/main/manuals/Belt_Tension_Calculations.ods
115 replies
RRCRat Rig Community [Unofficial]
•Created by R34Pr on 4/5/2024 in #fix-my-resonance
VC3.1 500mm Enc 2.0 BRS AWD Ti Gantry Tube Belt Tension
115 replies
RRCRat Rig Community [Unofficial]
•Created by R34Pr on 4/5/2024 in #fix-my-resonance
VC3.1 500mm Enc 2.0 BRS AWD Ti Gantry Tube Belt Tension
115 replies
RRCRat Rig Community [Unofficial]
•Created by R34Pr on 4/5/2024 in #fix-my-resonance
VC3.1 500mm Enc 2.0 BRS AWD Ti Gantry Tube Belt Tension
@auggie The measurement out of the guide I have done is a calculation to go from the Gates recommended tension value (exprmed in Lbs) to a frequecy measurment. th PF module seems to read the actual lbs value out of the belt so 2 different methods
115 replies
RRCRat Rig Community [Unofficial]
•Created by R34Pr on 4/5/2024 in #fix-my-resonance
VC3.1 500mm Enc 2.0 BRS AWD Ti Gantry Tube Belt Tension
Yes this is the one I use for my own production machines😃
115 replies
RRCRat Rig Community [Unofficial]
•Created by R34Pr on 4/5/2024 in #fix-my-resonance
VC3.1 500mm Enc 2.0 BRS AWD Ti Gantry Tube Belt Tension
My VC400 based was siting at 6500mm.s² and went to 13400mm.s² with the AWD drives on a TMC2209 24V setup
115 replies
RRCRat Rig Community [Unofficial]
•Created by R34Pr on 4/5/2024 in #fix-my-resonance
VC3.1 500mm Enc 2.0 BRS AWD Ti Gantry Tube Belt Tension
For what has been experienced so far, 1.5x-3x are generally what is achieve. It can fluctuate depending some factors; assembly quality, Y rails/X rail Z1 Preloaded or not, toolhead type, Adxl positionning, that kind of stuffs
115 replies
RRCRat Rig Community [Unofficial]
•Created by R34Pr on 4/5/2024 in #fix-my-resonance
VC3.1 500mm Enc 2.0 BRS AWD Ti Gantry Tube Belt Tension
We will see, maybe there will be other points to check afteward
115 replies
RRCRat Rig Community [Unofficial]
•Created by R34Pr on 4/5/2024 in #fix-my-resonance
VC3.1 500mm Enc 2.0 BRS AWD Ti Gantry Tube Belt Tension
This can make a HUGE difference
115 replies
RRCRat Rig Community [Unofficial]
•Created by R34Pr on 4/5/2024 in #fix-my-resonance
VC3.1 500mm Enc 2.0 BRS AWD Ti Gantry Tube Belt Tension
Hello! Have you done the 4 motors synchro ?
115 replies
RRCRat Rig Community [Unofficial]
•Created by genius23pl on 3/2/2023 in #fix-my-printer
Probe triggered prior to movement
Have you another probe/endstop to plug on and try, just to clear a probe issue.
69 replies
RRCRat Rig Community [Unofficial]
•Created by genius23pl on 3/2/2023 in #fix-my-printer
Probe triggered prior to movement
69 replies