Fr3sh
RRCRat Rig Community [Unofficial]
•Created by Fr3sh on 3/18/2025 in #ratos-support
Automatic unload of Filament after "FIRMWARE_RESTART"
2 replies
RRCRat Rig Community [Unofficial]
•Created by Fr3sh on 2/23/2024 in #german-support
Seltsame Artefakte, langsame Außenwände inkl. Vibrationen
55 replies
RRCRat Rig Community [Unofficial]
•Created by Fr3sh on 12/29/2023 in #fix-my-resonance
First steps with my resonance
12 replies
RRCRat Rig Community [Unofficial]
•Created by Fr3sh on 5/12/2023 in #ratos-support
Klicky Probe gets attached but then Error occurs
I am really sorry to bother you guys already again but I cant find the error with my Klicky. Its getting picked up properly moves back and then stops and the error "Shutdown due to expected probe state to be deployed but is stowed (1)" appears.
I already set up the printer.cfg again as in another thread mentioned. But it seems to keep failing.
Do I have to config something else for the homing to make the Klicky work? As far as I understood I only had to "activate" it.
Didn´t want to mess anything up so I just changed the pick up position.
best regards
Tri-D
40 replies
RRCRat Rig Community [Unofficial]
•Created by Fr3sh on 5/11/2023 in #ratos-support
Hotenend Thermistor only recognized when on Main MCU not when on Toolboard
Hey guys, I am also freaking out with the ADC out of range error after setting up the machine.
What I know is, that none of the Thermistors is broken and that the issue is the Hotend Thermistor connection.
When I plug the Hotend-Thermistor in the MCU as in the RatOS documentation everything works fine... but as soon as I put it in the EBB42 its not working anymore. I think that I did some kund of mistake in my n00bish printer.cfg in the toolboard part
Hope somebody can help me with that issue and tell me where my mistake is
12 replies