Pady
RRCRat Rig Community [Unofficial]
•Created by Pady on 2/27/2025 in #ratos-support
NOT!!!! Yet another VAOC problem I did not read the commision guide!!
A big sorry from my side!!
This is a mistake on my part as I was clearly too fast in (not) reading the guide thoroughly 😢
This post my be deleted or kept to show that this was a user/assembler error.
15 replies
RRCRat Rig Community [Unofficial]
•Created by Pady on 2/27/2025 in #ratos-support
NOT!!!! Yet another VAOC problem I did not read the commision guide!!
So...
The streamer type was wrong and needed to be changed.
The newly realised commission guide does not describe how and what needs to be changed.
Luckily I pieced it together from a previous build config.
15 replies
RRCRat Rig Community [Unofficial]
•Created by Pady on 2/27/2025 in #ratos-support
NOT!!!! Yet another VAOC problem I did not read the commision guide!!
I can also say that I have tested with a new install aswell and I have tested ratos doctor in Putty
15 replies
RRCRat Rig Community [Unofficial]
•Created by Pady on 2/6/2025 in #ratos-support
VAOC webcam stream not found
Problem solved!
I reinstalled RatOS and updated crowsnest FIRST and everything works 💪
27 replies
RRCRat Rig Community [Unofficial]
•Created by Pady on 2/6/2025 in #ratos-support
VAOC webcam stream not found
I'll have a try again tomorrow, I'm very much sure that at least one of them is assembled correctly.
I'll try and shut everything of tomorrow and switch to another module and cam.
I'm pretty tired of the IDEX and the pain to get it running is still not worth it in my opinion.
The pei ting profiles is way off too and the shaper calibration is a mess...
For me this is still too much hassle for a full release and is more alpha or beta..
27 replies
RRCRat Rig Community [Unofficial]
•Created by Pady on 2/6/2025 in #ratos-support
VAOC webcam stream not found
It shows the adress and it sees the board, but not the feed.
And it's the same with two other boards and camera combinations
27 replies
RRCRat Rig Community [Unofficial]
•Created by Pady on 2/6/2025 in #ratos-support
VAOC webcam stream not found
Nothing 😦
It feels really sad and time consuming now..
No answer from RatRig either
27 replies
RRCRat Rig Community [Unofficial]
•Created by Pady on 2/6/2025 in #ratos-support
VAOC webcam stream not found
I'm unsure what to do about it.
It will not show anything, not any of the cams..
27 replies
RRCRat Rig Community [Unofficial]
•Created by Pady on 2/6/2025 in #ratos-support
VAOC webcam stream not found
I'm unsure what to do about it.
It will not show anything, not any of the cams..
27 replies
RRCRat Rig Community [Unofficial]
•Created by Pady on 2/6/2025 in #ratos-support
VAOC webcam stream not found
How do I add it to mainsail??
27 replies
RRCRat Rig Community [Unofficial]
•Created by Pady on 2/6/2025 in #ratos-support
VAOC webcam stream not found
Tried with a complete 3rd module and cables, no luck there either
27 replies
RRCRat Rig Community [Unofficial]
•Created by Pady on 2/6/2025 in #ratos-support
VAOC webcam stream not found
Just checked, it is correctly connected, I tried and turned it 180 degree just to be sure. no awail.
Tried with a different camera module too, just to be sure (I have 2 more IDEX printers that needs assembling and 6 more to come....
27 replies
RRCRat Rig Community [Unofficial]
•Created by Pady on 2/6/2025 in #ratos-support
VAOC webcam stream not found
Hope this works??
27 replies
RRCRat Rig Community [Unofficial]
•Created by Pady on 2/6/2025 in #ratos-support
VAOC webcam stream not found
27 replies
RRCRat Rig Community [Unofficial]
•Created by Pady on 2/6/2025 in #ratos-support
VAOC webcam stream not found
@miklschmidt Anything that you can guide me in the direction of??
27 replies