tpjensen
RRCRat Rig Community [Unofficial]
ā¢Created by tpjensen on 3/16/2024 in #fix-my-printer
phaetus rapido UHF/HF and LDO orbiter 1.5 extruder. clogging
@Max Thnak you for your help š .... I got it working like this... First layer 220 degress others 210 degress. But I have to pull the filament out and cut it before starting a print.
22 replies
RRCRat Rig Community [Unofficial]
ā¢Created by tpjensen on 3/16/2024 in #fix-my-printer
phaetus rapido UHF/HF and LDO orbiter 1.5 extruder. clogging
Yes it is a 24V
But I just noticed a fail a big fail. The hotend comes with HF and UHF.. and it is very clear what size the nozzles are. Volcano very clear say 0.4 but if I look and my other 0.4 nozzles and that it is NOT 0.4 it could be 0.6 or even 0.8. So that is a problem. I have sent this info with photos to phaetus
22 replies
RRCRat Rig Community [Unofficial]
ā¢Created by tpjensen on 3/16/2024 in #fix-my-printer
phaetus rapido UHF/HF and LDO orbiter 1.5 extruder. clogging
Hi, I did messure the current to the fan but with a cheap multimeter and it messure 23.8V
22 replies
RRCRat Rig Community [Unofficial]
ā¢Created by tpjensen on 3/16/2024 in #fix-my-printer
phaetus rapido UHF/HF and LDO orbiter 1.5 extruder. clogging
Okay thanks, I will try the multimeter in the morning and the to lower temp more. Iām really happy that you are helping šš.
22 replies
RRCRat Rig Community [Unofficial]
ā¢Created by tpjensen on 3/16/2024 in #fix-my-printer
phaetus rapido UHF/HF and LDO orbiter 1.5 extruder. clogging
Yes here is one where infill is from the photo. PID I did that also just forgot to write that also. While printing it goes up and down -0.2 and +0.2 .... I will try a multimeter on the fan tommorow.
22 replies
RRCRat Rig Community [Unofficial]
ā¢Created by tpjensen on 3/16/2024 in #fix-my-printer
phaetus rapido UHF/HF and LDO orbiter 1.5 extruder. clogging
Okay I will give up for today, it still clogs for every 2-3 print starts. I did flow test and got it very nice, did slow down infill speed but it still looks like crab, outer and inner walls are very good. First layer is also perfect. But infill is very bad.
22 replies
RRCRat Rig Community [Unofficial]
ā¢Created by tpjensen on 3/16/2024 in #fix-my-printer
phaetus rapido UHF/HF and LDO orbiter 1.5 extruder. clogging
No enclosure... but dailing the heat down has help š . Now I try a flow test
22 replies
RRCRat Rig Community [Unofficial]
ā¢Created by tpjensen on 3/16/2024 in #fix-my-printer
phaetus rapido UHF/HF and LDO orbiter 1.5 extruder. clogging
22 replies
RRCRat Rig Community [Unofficial]
ā¢Created by tpjensen on 3/16/2024 in #fix-my-printer
phaetus rapido UHF/HF and LDO orbiter 1.5 extruder. clogging
I use PLA and have it set to 220 degrees, I have tried 3 brands all new out of the bag
22 replies
RRCRat Rig Community [Unofficial]
ā¢Created by tpjensen on 3/16/2024 in #fix-my-printer
phaetus rapido UHF/HF and LDO orbiter 1.5 extruder. clogging
Yes I see and have changed that now, but it still clog. Load filament no problem. But when it comes to blop and print no filament. If I heat up to 230 and extrude 10mm filament comes out again.
22 replies
RRCRat Rig Community [Unofficial]
ā¢Created by tpjensen on 3/16/2024 in #fix-my-printer
phaetus rapido UHF/HF and LDO orbiter 1.5 extruder. clogging
The motor is a LDO-36STH20-1004AHG
22 replies
RRCRat Rig Community [Unofficial]
ā¢Created by tpjensen on 3/16/2024 in #fix-my-printer
phaetus rapido UHF/HF and LDO orbiter 1.5 extruder. clogging
Okay thank you, I have uploaded my config file now. Yes I understand what I did thoose in config file is the Orbiter 1.5
22 replies
RRCRat Rig Community [Unofficial]
ā¢Created by tpjensen on 3/16/2024 in #fix-my-printer
phaetus rapido UHF/HF and LDO orbiter 1.5 extruder. clogging
Here is my config file
22 replies