Proof
RRCRat Rig Community [Unofficial]
•Created by genetic-orange on 11/4/2023 in #german-support
Rat OS eigenes mesh
Im startcode orca
START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}
Du musst in den macros aber auch
variable_adaptive_mesh auf true setzen hast du den Eintrag noch nicht musst du ihn hinzufügen
2 replies
RRCRat Rig Community [Unofficial]
•Created by dmeadows013 on 11/12/2023 in #fix-my-print
Possible underextrusion?
What Brand and type of filament do you use what temp ? Fanspeed?
Do you choosed the correct orbiter at the printer.cfg ?
10 replies
RRCRat Rig Community [Unofficial]
•Created by migferlab on 9/19/2023 in #fix-my-print
V-minion z-wobble or banding
I hope it too let us know
135 replies
RRCRat Rig Community [Unofficial]
•Created by vicious-gold on 10/23/2023 in #german-support
Unterextrusion / Extruder Motor überspringt steps
62 replies
RRCRat Rig Community [Unofficial]
•Created by extended-salmon on 10/23/2023 in #german-support
Unterextrusion / Extruder Motor überspringt steps
Du musst das Rad Auf der Welle drehen (Drucker sollte aus sein)
62 replies
RRCRat Rig Community [Unofficial]
•Created by migferlab on 9/19/2023 in #fix-my-print
V-minion z-wobble or banding
Not sure but now everything is fine without it 😊
135 replies
RRCRat Rig Community [Unofficial]
•Created by deep-jade on 10/23/2023 in #german-support
Unterextrusion / Extruder Motor überspringt steps
@Max Bilsing
Nein das Rad welches auf der Motorwelle sitzt die vergessen im Werk mal gerne die Madenschraube richtig fest zu ziehen oder aber setzen diese falsch auf die Welle
62 replies
RRCRat Rig Community [Unofficial]
•Created by ambitious-aqua on 10/23/2023 in #german-support
Unterextrusion / Extruder Motor überspringt steps
@Max Bilsing
Hatte mal ein ähnliches Ergebnis hast du mal geschaut ob das Treibrad vom Orbiter fest ist ?
Bei 2 von 5 war es bei mir locker und dann hatte ich auch solche Fehler im Druck
62 replies
RRCRat Rig Community [Unofficial]
•Created by conscious-sapphire on 11/8/2023 in #german-support
Suche Filter
26 replies
RRCRat Rig Community [Unofficial]
•Created by gywilo on 10/29/2023 in #fix-my-print
over extrusion and under extrusion on the same print
@gywilo
It also looked like this for me. I then converted to dualrail mod but since it got worse so I designed my own. It got a little better but didn't go away.
Ultimately the problem was that my printer wasn't standing flat on the floor.
Then I mounted adjustable heavy-duty feet and the problem was gone
10 replies
RRCRat Rig Community [Unofficial]
•Created by migferlab on 9/19/2023 in #fix-my-print
V-minion z-wobble or banding
135 replies
RRCRat Rig Community [Unofficial]
•Created by Proof on 10/7/2023 in #german-support
mcu Unable to connect
Mein Octopus hat sich verabschiedet warum auch immer
5 replies
RRCRat Rig Community [Unofficial]
•Created by Proof on 8/31/2023 in #fix-my-print
Toolboard Shutdown
It seems it was really just the usb-c connector that lost contact with the board when the print head moves backwards there is some pressure on the cable. I have now designed a holder for the cable and it has worked flawlessly so far
9 replies
RRCRat Rig Community [Unofficial]
•Created by Proof on 8/31/2023 in #fix-my-print
Toolboard Shutdown
smaller parts printing without any problem when the distances are shorter but yes, bad solder joints are also an option
resonances are okay i think
[input_shaper]
shaper_freq_x: 27.0
shaper_type_x: mzv
shaper_freq_y: 23.0
shaper_type_y: mzv
9 replies
RRCRat Rig Community [Unofficial]
•Created by Proof on 8/31/2023 in #fix-my-print
Toolboard Shutdown
i use higher quality usb cables and the cable ties are very tight
maybe the holder has too much play with the minion, it works without any problems, however, the movements are not as far-reaching as with the v-core
9 replies
RRCRat Rig Community [Unofficial]
•Created by Proof on 8/31/2023 in #fix-my-print
Toolboard Shutdown
I chose the wrong area, maybe an admin would be so kind as to move the post to fix my printer
9 replies
RRCRat Rig Community [Unofficial]
•Created by Proof on 8/1/2023 in #fix-my-mesh
still not a good result after the conversion
@ptegler okay, thanks for the tips I will try it with capton tape
24 replies
RRCRat Rig Community [Unofficial]
•Created by Proof on 8/1/2023 in #fix-my-mesh
still not a good result after the conversion
@ptegler yeah I heard about this method but alot of ppl say that is not a good idea
24 replies
RRCRat Rig Community [Unofficial]
•Created by Proof on 8/1/2023 in #fix-my-mesh
still not a good result after the conversion
@ptegler it is the plate with New mag sheet and New printbed
24 replies