David
RRCRat Rig Community [Unofficial]
•Created by David on 12/3/2024 in #fix-my-printer
Y layer surface only on X axes movements
Hey found the issue and did the first clean print .
I tightened alle the screws in the print head. There was a minor wobble in the printhead. So unscruwed the extruder and the pheatus retightened all screws and put things back together. First print is a succes.
Finally.
7 replies
RRCRat Rig Community [Unofficial]
•Created by David on 12/3/2024 in #fix-my-printer
Y layer surface only on X axes movements
Hey woud that be caused by overtight belts? Il check the print head this evening of I can see slack when manipulatieve the print head.
7 replies
RRCRat Rig Community [Unofficial]
•Created by David on 12/2/2022 in #fix-my-printer
Phaetus rapido heatbreak clogging
The prints last night where success. I did change the filament spool and the heartbreak is still friction less so far. I do intend to speed up prints once stable and use uhf. Not sure if heat creep is the problem. There is a slow build up in the heartbreak. I guess I’ll start use the 260 heat up on a regular base in order to regularly do maintenance hope that prevents the same issue in the future
27 replies
RRCRat Rig Community [Unofficial]
•Created by David on 12/2/2022 in #fix-my-printer
Phaetus rapido heatbreak clogging
I just cleaned the heatbreak with the backend of a drill. Did not like doing that and hope I did not scratch the heatbreak but it did the job. No friction and could extrude to 7mm/s without skipping . Anyway is printing now will know tomorrow if OK. Thanks for the tip though will try your method next time. Need to Google atomic pull. Will do so
27 replies
RRCRat Rig Community [Unofficial]
•Created by David on 12/2/2022 in #fix-my-printer
Phaetus rapido heatbreak clogging
The friction starts where the ceramic heater part starts. I have no clue how to clean the heat break. Any tips?
27 replies
RRCRat Rig Community [Unofficial]
•Created by David on 12/2/2022 in #fix-my-printer
Phaetus rapido heatbreak clogging
Hey, I'm sure the extruder is not the problem. Just disassembled the hot end once more and inserting an 1,5mm alan key in the heatbreak you can feel friction. When doing the same in one of the new Rapido hot ends the alan key has free play.
27 replies
RRCRat Rig Community [Unofficial]
•Created by David on 12/2/2022 in #fix-my-printer
Phaetus rapido heatbreak clogging
Nope open. Only use it for pla.
27 replies
RRCRat Rig Community [Unofficial]
•Created by David on 12/2/2022 in #fix-my-printer
Phaetus rapido heatbreak clogging
Will defiantly try to loosen the screws. I admit I did tighten the screws a few weeks ago when cleaning the heatbreak and never got the same flow.
Really hope to get the Rapido stable as I’m currently building 2 vcore 3.1 with this hotend. I have lost multiple kg of pla and many days of printing already.
27 replies