CustomaryGrub39 Comments - Answer Overflow

Awesome! thank you ill make sure I match nozzles! it is super awesome the printer is working great now and im even on the multimaterial prints aread after many benchmark prints! thank you for all your help!

229 replies

RRCRat Rig Community [Unofficial]

•Created by CustomaryGrub39 on 3/13/2025 in #fix-my-printer

Vcore 4 Endstop issue

seems to be the nozzle was the issue its printing past the 3rd layer now with the other one

229 replies

RRCRat Rig Community [Unofficial]

•Created by CustomaryGrub39 on 3/13/2025 in #fix-my-printer

Vcore 4 Endstop issue

thank you that is great to know! would you mind sending the nozzle you got?

229 replies

RRCRat Rig Community [Unofficial]

•Created by CustomaryGrub39 on 3/13/2025 in #fix-my-printer

Vcore 4 Endstop issue

Well damn I'll try the other nozzle then how do I tell it to be 50% and it do that moving forward I'm not interested in going fast yet want to get a good print first 😂

229 replies

RRCRat Rig Community [Unofficial]

•Created by CustomaryGrub39 on 3/13/2025 in #fix-my-printer

Vcore 4 Endstop issue

no temp drop it says it is still 210 and holds it good. marked on the extruder part that rotates and it is still spinning.... its defenitly when it goes to 100% and extrusion turns to nothing being extruded

229 replies

RRCRat Rig Community [Unofficial]

•Created by CustomaryGrub39 on 3/13/2025 in #fix-my-printer

Vcore 4 Endstop issue

Ill Try that out. seems to be when the part cooler goes to 100% and almost imediatly stops pulling filiment. turn it down to 50% and it starts moving again

229 replies

RRCRat Rig Community [Unofficial]

•Created by CustomaryGrub39 on 3/13/2025 in #fix-my-printer

Vcore 4 Endstop issue

So i did my first test print and it seems like after the 3rd layer my filament is no longer being loaded it is just moving around without extruding. tried 2 difirent models and happened on both...

229 replies

RRCRat Rig Community [Unofficial]

•Created by CustomaryGrub39 on 3/13/2025 in #fix-my-printer

Vcore 4 Endstop issue

so the documentation does talk about what to do with the last 2 lines...

[gcode_macro RatOS]
variable_shaper_x_freq: [T0_X, T1_X, COPY_X_AVERAGE, MIRROR_X_AVERAGE]       
variable_shaper_y_freq: [T0_Y, T1_Y, COPY_Y_AVERAGE, MIRROR_Y_AVERAGE]           
variable_shaper_x_type: ["mzv", "mzv", "mzv", "mzv"]   
variable_shaper_y_type: ["mzv", "mzv", "mzv", "mzv"]

229 replies

RRCRat Rig Community [Unofficial]

•Created by CustomaryGrub39 on 3/13/2025 in #fix-my-printer

Vcore 4 Endstop issue

im waiting for the mirror section of the Input Shaper section then on to the HAOC calibration

229 replies

RRCRat Rig Community [Unofficial]

•Created by CustomaryGrub39 on 3/13/2025 in #fix-my-printer

Vcore 4 Endstop issue

all smooth sailing now

229 replies

RRCRat Rig Community [Unofficial]