Dayum
RRCRat Rig Community [Unofficial]
•Created by Dayum on 12/11/2024 in #fix-my-printer
Z1 Drops after print
so ill try to change the oldham... but thats will take a while
89 replies
RRCRat Rig Community [Unofficial]
•Created by Dayum on 12/11/2024 in #fix-my-printer
Z1 Drops after print
when i tried to screw into them they fall apart
89 replies
RRCRat Rig Community [Unofficial]
•Created by Dayum on 12/11/2024 in #fix-my-printer
Z1 Drops after print
yeah but i had delamination in liek 20% of the parts
89 replies
RRCRat Rig Community [Unofficial]
•Created by Dayum on 12/11/2024 in #fix-my-printer
Z1 Drops after print
that thing has to work
89 replies
RRCRat Rig Community [Unofficial]
•Created by Dayum on 12/11/2024 in #fix-my-printer
Z1 Drops after print
yeah but i cant wait days/weeks for answers and replacements
89 replies
RRCRat Rig Community [Unofficial]
•Created by Dayum on 12/11/2024 in #fix-my-printer
Z1 Drops after print
and checking their own printed parts and check if the printbad is somewhere flat shouldnt be impossible
89 replies
RRCRat Rig Community [Unofficial]
•Created by Dayum on 12/11/2024 in #fix-my-printer
Z1 Drops after print
i swaped the gantry to Titan tube
89 replies
RRCRat Rig Community [Unofficial]
•Created by Dayum on 12/11/2024 in #fix-my-printer
Z1 Drops after print
the printed parts delivered by RR
89 replies
RRCRat Rig Community [Unofficial]
•Created by Dayum on 12/11/2024 in #fix-my-printer
Z1 Drops after print
it prints great, when it prints xD
89 replies
RRCRat Rig Community [Unofficial]
•Created by Dayum on 12/11/2024 in #fix-my-printer
Z1 Drops after print
printed parts were horrible, broken heatbed (thermal fuse tripped at 80c), printbed with S curve in it and now this. RR should rly improve in QC
89 replies
RRCRat Rig Community [Unofficial]
•Created by Dayum on 12/11/2024 in #fix-my-printer
Z1 Drops after print
oh man this printer is becoming more and more of a nightmare.
89 replies
RRCRat Rig Community [Unofficial]
•Created by Dayum on 12/11/2024 in #fix-my-printer
Z1 Drops after print
yeap
89 replies
RRCRat Rig Community [Unofficial]
•Created by Dayum on 12/11/2024 in #fix-my-printer
Z1 Drops after print
not the same motor as before but same possition
89 replies
RRCRat Rig Community [Unofficial]
•Created by Dayum on 12/11/2024 in #fix-my-printer
Z1 Drops after print
front right and back
89 replies
RRCRat Rig Community [Unofficial]
•Created by Dayum on 12/11/2024 in #fix-my-printer
Z1 Drops after print
yeah as i wrote today, i swaped 2 motors
89 replies
RRCRat Rig Community [Unofficial]
•Created by Dayum on 12/11/2024 in #fix-my-printer
Z1 Drops after print
@Helge Keck i have now changed 2 motors, the problem has improved somewhat, but sadly has not disappeared completely.
however, i have seen that some oil (i initially treated the threaded rods with fine oil) has run down and could possibly have crept into the motor. This may be the reason for the reduced resistance.
89 replies
RRCRat Rig Community [Unofficial]
•Created by Dayum on 12/11/2024 in #fix-my-printer
Z1 Drops after print
not sure ... but ill try... just not now... ill have to figure out how to lift that damn printer 😄
89 replies
RRCRat Rig Community [Unofficial]
•Created by Dayum on 12/11/2024 in #fix-my-printer
Z1 Drops after print
Front motors should have to hold only 25% of the bedweight while the back one takes 50%
89 replies
RRCRat Rig Community [Unofficial]
•Created by Dayum on 12/11/2024 in #fix-my-printer
Z1 Drops after print
yeah i could.... its a nightmare on a 500... but i dont have a spare motor
89 replies
RRCRat Rig Community [Unofficial]
•Created by Dayum on 12/11/2024 in #fix-my-printer
Z1 Drops after print
i did
89 replies