camera setup logitech c920
After reflashing to ratos 2.1 i have to set up my camera again, but idk how to do it. cant get anymore than 0-1 fps.. is there anyone that can help?
29 Replies
a bit more info, please
machine, etc
vcore 3.1 400 btt octopus 1.1
check crowsnest.conf
the FPS is set there
[crowsnest]
log_path: /home/pi/printer_data/logs/crowsnest.log
log_level: verbose # Valid Options are quiet/verbose/debug
delete_log: false # Deletes log on every restart, if set to true
no_proxy: false
[cam 1]
mode: ustreamer # ustreamer - Provides mjpg and snapshots. (All devices)
# camera-streamer - Provides webrtc, mjpg and snapshots. (rpi + Raspi OS based only)
enable_rtsp: false # If camera-streamer is used, this enables also usage of an rtsp server
rtsp_port: 8554 # Set different ports for each device!
port: 8080 # HTTP/MJPG Stream/Snapshot Port
device: /dev/video0 # See Log for available ...
resolution: 640x480 # widthxheight format
max_fps: 15 # If Hardware Supports this it will be forced, otherwise ignored/coerced.
#custom_flags: # You can run the Stream Services with custom flags.
#v4l2ctl: # Add v4l2-ctl parameters to setup your camera, see Log what your cam is capable of.
does it only show 1 fps even when printing?
yes sir
increase resolution, maybe it helps
still the same
open webcam tab and check. That is not the best place to check this
home the machine and check if it improves
after homing
not after... during
its the same during
not sure why. Everything looks ok in configs
Just went through this yesterday. Nuke the current webcam, and then "Add webcam" using the "Adaptive MJPEG" setting. Change your framerate in "Crowsnest.conf" to say 25 to 30 fps, and then reboot. I'm routinely seeing around 17 to 20 fps printing or not. It's a bit jerky, but better than static.
I would use 'camera-streamer`, it is supposed to take advantage of the raspi better
I can't find the model, but it is a logitech and going to this mode I was able to get 30+ fps where before it was barely clearing 10, and at a higher resolution now
I couldn't get webrtc to connect, but maybe I need to try the same approach and nuke the cam working now. It's crystal clear at 20 fps, but if it'll take some load off the LAN it'll be worth a shot.
nothing is working for me at this moment..
double check that the cam still works hooked up to your computer?
yea sorry, didnt mean its not working. im still getting 0-1 fps. and its only the adaptive mjpeg thats giving me a video. none of the other ones
oh, okay. By "nothing is working" i thought you weren't getting video at all anymore
not the right word from my side, apologize
Is there plenty of light? If a webcam isn't getting a much light, it will turn down its fps just to get something of a picture out
yes, i got led light in the fron of the machine. it was working fine before i reflashed and updated to 2.1
How did you go ? I'm chasing down my own logittech camera problem atm.
Had the same problem, for me the problem was the WiFi
When I connected trough ethernet is was all fine
I have made a capture at work and in a span of 9hours the camera streamed data was 230GiB
So two things check your wifi and see if you can increase throughput
Or communicate with the printer trough ethernet
Having the same exact issue... Updated from 2.0.x to 2.1... Framerate dropped to 1-3 FPS... Is this really a wifi issue? Seems unlikely if it was working previously over wifi... When you say 'check your wifi', what exactly do you mean? Where am I looking to increase throughput - on the pi?