PabloMirón
RRCRat Rig Community [Unofficial]
•Created by PabloMirón on 7/11/2024 in #ratos-support
Engines hum and heat up a lot with Kraken and RatOS2.1
I have already sent you a file.
162 replies
RRCRat Rig Community [Unofficial]
•Created by PabloMirón on 7/11/2024 in #ratos-support
Engines hum and heat up a lot with Kraken and RatOS2.1
Don't worry, weekends are for resting.
162 replies
RRCRat Rig Community [Unofficial]
•Created by PabloMirón on 7/11/2024 in #ratos-support
Engines hum and heat up a lot with Kraken and RatOS2.1
In about an hour I arrived home and I sent you the debug file
162 replies
RRCRat Rig Community [Unofficial]
•Created by PabloMirón on 7/11/2024 in #ratos-support
Engines hum and heat up a lot with Kraken and RatOS2.1
Good afternoon. No changes have been applied. Both values remain the same in both files.
162 replies
RRCRat Rig Community [Unofficial]
•Created by PabloMirón on 7/11/2024 in #ratos-support
Engines hum and heat up a lot with Kraken and RatOS2.1
What I don't know is if the uart_pin affects SPI mode.
162 replies
RRCRat Rig Community [Unofficial]
•Created by PabloMirón on 7/11/2024 in #ratos-support
Engines hum and heat up a lot with Kraken and RatOS2.1
162 replies
RRCRat Rig Community [Unofficial]
•Created by PabloMirón on 7/11/2024 in #ratos-support
Engines hum and heat up a lot with Kraken and RatOS2.1
162 replies
RRCRat Rig Community [Unofficial]
•Created by PabloMirón on 7/11/2024 in #ratos-support
Engines hum and heat up a lot with Kraken and RatOS2.1
And yes, I have installed the screen on the back so I can see both things at the same time.
162 replies
RRCRat Rig Community [Unofficial]
•Created by PabloMirón on 7/11/2024 in #ratos-support
Engines hum and heat up a lot with Kraken and RatOS2.1
At the end of the video you can see that the second power supply, which is the 48 volt one, has been turned off.
162 replies
RRCRat Rig Community [Unofficial]
•Created by PabloMirón on 7/11/2024 in #ratos-support
Engines hum and heat up a lot with Kraken and RatOS2.1
162 replies
RRCRat Rig Community [Unofficial]
•Created by PabloMirón on 7/11/2024 in #ratos-support
Engines hum and heat up a lot with Kraken and RatOS2.1
It is curious that the three Z axis motors work well and their cables are pin to pin.
162 replies
RRCRat Rig Community [Unofficial]
•Created by PabloMirón on 7/11/2024 in #ratos-support
Engines hum and heat up a lot with Kraken and RatOS2.1
I changed them on both engines.
162 replies
RRCRat Rig Community [Unofficial]
•Created by PabloMirón on 7/11/2024 in #ratos-support
Engines hum and heat up a lot with Kraken and RatOS2.1
162 replies
RRCRat Rig Community [Unofficial]
•Created by PabloMirón on 7/11/2024 in #ratos-support
Engines hum and heat up a lot with Kraken and RatOS2.1
🤔
162 replies
RRCRat Rig Community [Unofficial]
•Created by PabloMirón on 7/11/2024 in #ratos-support
Engines hum and heat up a lot with Kraken and RatOS2.1
I changed the green and black and it does the same thing.
162 replies
RRCRat Rig Community [Unofficial]
•Created by PabloMirón on 7/11/2024 in #ratos-support
Engines hum and heat up a lot with Kraken and RatOS2.1
If I understood correctly, if I change the order of only two cables, for example I swap the green and the black, should it work?
162 replies
RRCRat Rig Community [Unofficial]
•Created by PabloMirón on 7/11/2024 in #ratos-support
Engines hum and heat up a lot with Kraken and RatOS2.1
Don't hate me too much😉
162 replies
RRCRat Rig Community [Unofficial]
•Created by PabloMirón on 7/11/2024 in #ratos-support
Engines hum and heat up a lot with Kraken and RatOS2.1
Hello again, yesterday and today I will be on a work trip.
But I will explain the problem when exchanging the cables:
The motors are two phases, one is the two cables on the right (A1 and A2/Black and Green) and the other is the two on the left (B1 and B2/Red and Blue) .
If I swap the middle ones (A1 and B2/Red and Green) I mix the two phases and that causes a short circuit that causes the board to reset.
Before the software update, it was working, vibrating and getting hot, but it worked. I think the problem is something with the firmware/software.
162 replies
RRCRat Rig Community [Unofficial]
•Created by PabloMirón on 7/11/2024 in #ratos-support
Engines hum and heat up a lot with Kraken and RatOS2.1
162 replies
RRCRat Rig Community [Unofficial]
•Created by PabloMirón on 7/11/2024 in #ratos-support
Engines hum and heat up a lot with Kraken and RatOS2.1
I'm having all the problems in the world, it's super difficult to remove the pins, a connector broke and when I tried to do a HOME everything restarted.
162 replies