Hopfenschorsch
RRCRat Rig Community [Unofficial]
•Created by Hopfenschorsch on 7/25/2024 in #ratos-support
Pin 'VF4' is not a valid pin name on mcu 'mcu' & pin PB14 is reserved for spi2
@miklschmidt Updated RatOS, the Configurator, made a New RatOS.cfg, added this and it is working now.
115 replies
RRCRat Rig Community [Unofficial]
•Created by Hopfenschorsch on 7/25/2024 in #ratos-support
Pin 'VF4' is not a valid pin name on mcu 'mcu' & pin PB14 is reserved for spi2
didn´t had a pt1000 laying around
115 replies
RRCRat Rig Community [Unofficial]
•Created by Hopfenschorsch on 7/25/2024 in #ratos-support
Pin 'VF4' is not a valid pin name on mcu 'mcu' & pin PB14 is reserved for spi2
Dindn´t know you could use the MAX with sth diffrent then PT100/0
115 replies
RRCRat Rig Community [Unofficial]
•Created by Hopfenschorsch on 7/25/2024 in #ratos-support
Pin 'VF4' is not a valid pin name on mcu 'mcu' & pin PB14 is reserved for spi2
i find it useful because u could use the normal Port for a sensor to check the temperature of the Toolhead or sth.
115 replies
RRCRat Rig Community [Unofficial]
•Created by Hopfenschorsch on 7/25/2024 in #ratos-support
Pin 'VF4' is not a valid pin name on mcu 'mcu' & pin PB14 is reserved for spi2
Will try it as soon as possible. chainging the SD card again
115 replies
RRCRat Rig Community [Unofficial]
•Created by Hopfenschorsch on 7/25/2024 in #ratos-support
Pin 'VF4' is not a valid pin name on mcu 'mcu' & pin PB14 is reserved for spi2
Perfekt. Thank you. Are you planning to support MAX31865 in the Configurator?
115 replies
RRCRat Rig Community [Unofficial]
•Created by Hopfenschorsch on 7/25/2024 in #ratos-support
Pin 'VF4' is not a valid pin name on mcu 'mcu' & pin PB14 is reserved for spi2
ah okay
115 replies
RRCRat Rig Community [Unofficial]
•Created by Hopfenschorsch on 7/25/2024 in #ratos-support
Pin 'VF4' is not a valid pin name on mcu 'mcu' & pin PB14 is reserved for spi2
on 2.1 I use Beacon for the adxl
115 replies
RRCRat Rig Community [Unofficial]
•Created by Hopfenschorsch on 7/25/2024 in #ratos-support
Pin 'VF4' is not a valid pin name on mcu 'mcu' & pin PB14 is reserved for spi2
that would be fine with me changing it manual to use CAN.
115 replies
RRCRat Rig Community [Unofficial]
•Created by Hopfenschorsch on 7/25/2024 in #ratos-support
Pin 'VF4' is not a valid pin name on mcu 'mcu' & pin PB14 is reserved for spi2
Helge said that to me in the morning
115 replies
RRCRat Rig Community [Unofficial]
•Created by Hopfenschorsch on 7/25/2024 in #ratos-support
Pin 'VF4' is not a valid pin name on mcu 'mcu' & pin PB14 is reserved for spi2
or hope you find the Problem
115 replies
RRCRat Rig Community [Unofficial]
•Created by Hopfenschorsch on 7/25/2024 in #ratos-support
Pin 'VF4' is not a valid pin name on mcu 'mcu' & pin PB14 is reserved for spi2
I think i have to stay on 2.0.2 or buy a new Board.
115 replies
RRCRat Rig Community [Unofficial]
•Created by Hopfenschorsch on 7/25/2024 in #ratos-support
Pin 'VF4' is not a valid pin name on mcu 'mcu' & pin PB14 is reserved for spi2
Physical not really because the motor of the Galileo 2 is to close to the 90 deg USB C
115 replies
RRCRat Rig Community [Unofficial]
•Created by Hopfenschorsch on 7/25/2024 in #ratos-support
Pin 'VF4' is not a valid pin name on mcu 'mcu' & pin PB14 is reserved for spi2
Will go with USB when i change to the new SB2209 USB
115 replies
RRCRat Rig Community [Unofficial]
•Created by Hopfenschorsch on 7/25/2024 in #ratos-support
Pin 'VF4' is not a valid pin name on mcu 'mcu' & pin PB14 is reserved for spi2
haven´t flashed the toolhead for 2.1. I can change the two SD card with out changing sth in the software/reflashing
115 replies
RRCRat Rig Community [Unofficial]
•Created by Hopfenschorsch on 7/25/2024 in #ratos-support
Pin 'VF4' is not a valid pin name on mcu 'mcu' & pin PB14 is reserved for spi2
meant PB14/15 was a spelling mistake. Is it maybe because i run an older Version of Klipper on the Board it self? Version: v0.12.0-86-gdaf875e6. But then it shoul work on 2.1 because it is the same Hardware
115 replies
RRCRat Rig Community [Unofficial]
•Created by Hopfenschorsch on 7/25/2024 in #ratos-support
Pin 'VF4' is not a valid pin name on mcu 'mcu' & pin PB14 is reserved for spi2
But why does PF14/15 work on 2.0.2 and not on 2.1? What did i change to make it work?
115 replies
RRCRat Rig Community [Unofficial]
•Created by Hopfenschorsch on 7/25/2024 in #ratos-support
Pin 'VF4' is not a valid pin name on mcu 'mcu' & pin PB14 is reserved for spi2
Will try it when its done
115 replies
RRCRat Rig Community [Unofficial]
•Created by Hopfenschorsch on 7/25/2024 in #ratos-support
Pin 'VF4' is not a valid pin name on mcu 'mcu' & pin PB14 is reserved for spi2
nothing crucial
115 replies
RRCRat Rig Community [Unofficial]
•Created by Hopfenschorsch on 7/25/2024 in #ratos-support
Pin 'VF4' is not a valid pin name on mcu 'mcu' & pin PB14 is reserved for spi2
115 replies