Rick_Kickass
RRCRat Rig Community [Unofficial]
•Created by Rick_Kickass on 4/25/2025 in #ratos-support
How to address Host (RPI) gpio pin
46 replies
RRCRat Rig Community [Unofficial]
•Created by Rick_Kickass on 4/25/2025 in #ratos-support
How to address Host (RPI) gpio pin
vs this with the sensors hidden
46 replies
RRCRat Rig Community [Unofficial]
•Created by Rick_Kickass on 4/25/2025 in #ratos-support
How to address Host (RPI) gpio pin
46 replies
RRCRat Rig Community [Unofficial]
•Created by Rick_Kickass on 4/25/2025 in #ratos-support
How to address Host (RPI) gpio pin
i simply changed the temperature_mcu to temperature_host. it is more of a workaround because now the rpi and the skr show the same temp. after that i have disabled the host and mcu sensors in the mainsail interface because rpi and skr showed up twice because of the temperature fan settings
46 replies
RRCRat Rig Community [Unofficial]
•Created by Rick_Kickass on 4/25/2025 in #ratos-support
How to address Host (RPI) gpio pin
thx for your help
46 replies
RRCRat Rig Community [Unofficial]
•Created by Rick_Kickass on 4/25/2025 in #ratos-support
How to address Host (RPI) gpio pin
nevermind, got it working 👍
46 replies
RRCRat Rig Community [Unofficial]
•Created by Rick_Kickass on 4/25/2025 in #ratos-support
How to address Host (RPI) gpio pin
in printer.cfg i hav now specified a temperature fan which also uses the temperature sensor part...
46 replies
RRCRat Rig Community [Unofficial]
•Created by Rick_Kickass on 4/25/2025 in #ratos-support
How to address Host (RPI) gpio pin
so it is the tepmerature sensor
46 replies
RRCRat Rig Community [Unofficial]
•Created by Rick_Kickass on 4/25/2025 in #ratos-support
How to address Host (RPI) gpio pin
[temperature_sensor SKR_Pro_v1.2]
sensor_type: temperature_mcu
46 replies
RRCRat Rig Community [Unofficial]
•Created by Rick_Kickass on 4/25/2025 in #ratos-support
How to address Host (RPI) gpio pin
doesn't work. in ratos.cfg the following is specified:
46 replies
RRCRat Rig Community [Unofficial]
•Created by Rick_Kickass on 4/25/2025 in #ratos-support
How to address Host (RPI) gpio pin
ok, i'll give it a try...
46 replies
RRCRat Rig Community [Unofficial]
•Created by Rick_Kickass on 4/25/2025 in #ratos-support
How to address Host (RPI) gpio pin
doesn't need to be now... when you are done with work 😉
46 replies
RRCRat Rig Community [Unofficial]
•Created by Rick_Kickass on 4/25/2025 in #ratos-support
How to address Host (RPI) gpio pin
okay, maybe you can tell me how and what to override in printer.cfg. right now i've created a custom.cfg which is included in the printer.cfg. or do i need to put it directly in the printer.cfg?
46 replies
RRCRat Rig Community [Unofficial]
•Created by Rick_Kickass on 4/25/2025 in #ratos-support
How to address Host (RPI) gpio pin
but if i override it in ratos.cfg it gets restored on every reboot
46 replies
RRCRat Rig Community [Unofficial]
•Created by Rick_Kickass on 4/25/2025 in #ratos-support
How to address Host (RPI) gpio pin
46 replies
RRCRat Rig Community [Unofficial]
•Created by Rick_Kickass on 4/25/2025 in #ratos-support
How to address Host (RPI) gpio pin
allright, thx alot
46 replies
RRCRat Rig Community [Unofficial]
•Created by Rick_Kickass on 4/25/2025 in #ratos-support
How to address Host (RPI) gpio pin
may take a minute or two
46 replies
RRCRat Rig Community [Unofficial]
•Created by Rick_Kickass on 4/25/2025 in #ratos-support
How to address Host (RPI) gpio pin
wait. i have to restart the printer to screenshot that
46 replies
RRCRat Rig Community [Unofficial]
•Created by Rick_Kickass on 4/25/2025 in #ratos-support
How to address Host (RPI) gpio pin
but the line sensor_type: temperature_mcu interferes with the ratos.cfg which also uses temperature_mcu for monitoring the board temp
46 replies
RRCRat Rig Community [Unofficial]
•Created by Rick_Kickass on 4/25/2025 in #ratos-support
How to address Host (RPI) gpio pin
[temperature_fan SKR_Pro]
pin: PD2
kick_start_time: 0.5
max_speed: 1.0
min_speed: 0.0
hardware_pwm: False
cycle_time: 0.1
sensor_type: temperature_mcu
target_temp: 40
min_temp: 0
max_temp: 80
tachometer_pin: ^PE2
tachometer_ppr: 2
tachometer_poll_interval: 0.0015
control: pid
pid_Kp: 1
pid_Ki: 1
pid_Kd: 1
46 replies