Nordar
TTyperactive.xyz
•Created by taro_86 on 11/18/2024 in #🛟-help
Bottom Row Not Working
I’d rather wait for a new nano rev to be honest. I’m testing other keebs at the moment and corne is my travel option
15 replies
TTyperactive.xyz
•Created by taro_86 on 11/18/2024 in #🛟-help
Bottom Row Not Working
Basically since November when it happened to me for the second time I’m left with a fried nano and no way of using the corne
15 replies
TTyperactive.xyz
•Created by taro_86 on 11/18/2024 in #🛟-help
Bottom Row Not Working
Happened to me twice now, after the second time I stopped using a premium case. On the first time I got a replacement nano. Now on the second time I’m still waiting for Nick to respond on the support topic. Running theory is that something I causing a short around the nano’s usb port during charging.
15 replies
TTyperactive.xyz
•Created by Nordar on 10/25/2024 in #🛟-help
Corne with premium case: bottom row on the left split stopped working
For me it has been the bottom row on the left side both times, once non-plugged and once plugged
When testing with via key tester (tab in the via software), it sometimes registers the first keypress on the bottom row after a reset but then it sees it as constantly pressed, ex lshft. When I click that lshft on another keyboard while that’s happening, the software doesn’t registers it as constantly pressed any more, nor does it register any following presses on that row until the next nano reset.
Hope that tells you more about what might be happening.
81 replies
TTyperactive.xyz
•Created by Nordar on 10/25/2024 in #🛟-help
Corne with premium case: bottom row on the left split stopped working
My cheap-a$$ multimeter (Uni-T UT60EU) doesn’t register anything anywhere apart from the standoff threads
81 replies
TTyperactive.xyz
•Created by Nordar on 10/25/2024 in #🛟-help
Corne with premium case: bottom row on the left split stopped working
I only get continuity when I stick the probes in the threaded standoffs
81 replies
TTyperactive.xyz
•Created by Nordar on 10/25/2024 in #🛟-help
Corne with premium case: bottom row on the left split stopped working
There is no continuity even on the case itself, I mean, it’s painted, right. And yeah I got a 3d printer.
81 replies
TTyperactive.xyz
•Created by Nordar on 10/25/2024 in #🛟-help
Corne with premium case: bottom row on the left split stopped working
That’s the closest I can get without a stronger light source
81 replies
TTyperactive.xyz
•Created by Nordar on 10/25/2024 in #🛟-help
Corne with premium case: bottom row on the left split stopped working
81 replies
TTyperactive.xyz
•Created by Nordar on 10/25/2024 in #🛟-help
Corne with premium case: bottom row on the left split stopped working
maybe a rubber/plastic gasket around the usb-c port plus screw in nyron standofs instead of integrated ones would solve all potential short issues
81 replies
TTyperactive.xyz
•Created by Nordar on 10/25/2024 in #🛟-help
Corne with premium case: bottom row on the left split stopped working
@Nick but to your point: that is likely, left half is charged (connected via cable) at least twice as often as the right one.
As an anecdotal evidence to your point - I use a number of other nice!nanos in all of my different builds but with FR4 or 3d printed cases, never had any of those issues, and now this happened twice in a short period of time as soon as I got an alu case.
81 replies
TTyperactive.xyz
•Created by Nordar on 10/25/2024 in #🛟-help
Corne with premium case: bottom row on the left split stopped working
81 replies
TTyperactive.xyz
•Created by Nordar on 10/25/2024 in #🛟-help
Corne with premium case: bottom row on the left split stopped working
on that note, when it previously happened, the keyboard was not connected to anything, just bluetooth
81 replies
TTyperactive.xyz
•Created by Nordar on 10/25/2024 in #🛟-help
Corne with premium case: bottom row on the left split stopped working
cable connected directly to the PC motherboard, asus b650e-i, powered by asus loki 850w ATX 3.0 psu
81 replies
TTyperactive.xyz
•Created by Nordar on 10/25/2024 in #🛟-help
Corne with premium case: bottom row on the left split stopped working
just before I started charging the left half I charged the right half while I was working, and it was connected for about 3h
81 replies
TTyperactive.xyz
•Created by Nordar on 10/25/2024 in #🛟-help
Corne with premium case: bottom row on the left split stopped working
the same cable was used to charge and flash firmware in 5 other nano-based keyboards I have. Including the right half of this corne that's 9 different devices used with it in the last 3-4 years, not counting all the standard wired keyboards I used in that time. Only this particular pcb - alu case combo failed twice in a period of like a month.
81 replies
TTyperactive.xyz
•Created by Nordar on 10/25/2024 in #🛟-help
Corne with premium case: bottom row on the left split stopped working
it was low on power so while I was grabbing coffee i wanted to charge it a bit (I don't like working on wired peritherals)
81 replies
TTyperactive.xyz
•Created by Nordar on 10/25/2024 in #🛟-help
Corne with premium case: bottom row on the left split stopped working
it was
81 replies
TTyperactive.xyz
•Created by taro_86 on 11/18/2024 in #🛟-help
Bottom Row Not Working
the very same thing just happened to me for the second time on a replaced nano: bottom row on the left half suddenly stopped working.
Did you use magnetic connector?
Do you use a premium alu case?
15 replies