Biscayne
RRCRat Rig Community [Unofficial]
•Created by Biscayne on 1/29/2025 in #fix-my-printer
z-offset constantly triggered VC4 IDEX
Problem has been solved. I re-checked the wiring, and the pin for the endstop came out of the housing, and wasn't making contact with the pin on the board. Thanks for the help, again!
5 replies
RRCRat Rig Community [Unofficial]
•Created by Biscayne on 1/26/2025 in #fix-my-printer
Beacon not recognized after IDEX upgrade
16 replies
RRCRat Rig Community [Unofficial]
•Created by Biscayne on 1/26/2025 in #fix-my-printer
Beacon not recognized after IDEX upgrade
I don’t know where the superpinda came from. I never selected it, or had an option to select a probe that I recall
16 replies
RRCRat Rig Community [Unofficial]
•Created by Biscayne on 1/26/2025 in #fix-my-printer
Beacon not recognized after IDEX upgrade
OK, got it. dont modify the ratos.cfg. So how do I fix my problem? when I run the normal configurator, the beacon doesnt get recognized, and then modifying the printer.cfg is a pointless endeavor.
16 replies
RRCRat Rig Community [Unofficial]
•Created by Biscayne on 1/26/2025 in #fix-my-printer
Beacon not recognized after IDEX upgrade
New information: after playing with the ratos and printer cfg files, I was able to get the beacon probe reinstalled. Now every time I restart the printer, ratos.cfg wipes out the [include RatOS/z-probe/beacon.cfg] line and it freaks everything out. it wipes my previous calibration of the beacon as well on every soft restart, to where i have to re-run beacon_initial-calibration in order to get the machine to home
16 replies
RRCRat Rig Community [Unofficial]
•Created by Biscayne on 1/26/2025 in #fix-my-printer
Beacon not recognized after IDEX upgrade
Here's my debug zip
16 replies