TMC 'extruder' reports error: GSTAT: 00000001 reset=1(Reset)
I keep having random issue whit the vcore printers.
I have trued a lot of thing like changing wiring usb cables , step drivers, extruder mainboard, but these printers keep getting these errors.
I'm getting sick from this crap units and i lost about r 60kg of petg during all thes errors and issue
Can somebody help me please to understand why these are so very unstable?
1. Lost Communication with Beacon
Random disconnects during operation, causing failed bed leveling or mesh generation. Tried various fixes (e.g., USB stability, power supply checks, firmware updates), but issue persists.
2. TMC Driver Error on Extruder
Frequent TMC errors (e.g., overheating or communication loss) lead to extrusion halts. Adjusted current settings, improved cooling, and tested configurations, but no resolution.
3. Lost Communication with MCU
Intermittent loss of connection between Raspberry Pi and MCU, requiring restarts. Tried replacing cables, updating firmware, and ensuring stable power, but the problem remains.
3 Replies
1 - sounds like the USB cable isn't secure, so it loses connection
2 - not sure
3 - what kind of cable are you using to connect the pi to the MCU?
Hi,
1: Yes I check the wires and all is secure and well. I changed wires and cable. I soldered the wires to the beacon. still happens.
2:: changed driver, update, re install from the ratos. checke dall is OK on the hardware side.
3: Also used several cables.
these errors are accuring random on : 2x vcore 4 500 2x vcore 3.1 400 , vcore 3.1 idex 500
Machines are whit pi and cb1 octopus and a mante M8P hardware and on all systems this is happening.??
I truly believe that this is something software or firmware.
I'm running the printer day and night but at this moment I am verry negative about the unts because they are just not working whit this rendom BS.
I dont see a solution for this ? do you whant some debug files to check? or what can I do to know where the problem is?
tnx.
I also have some other problem.
When i select a job in the klipper screen 50% of the time the systems are failing because of timing problem. Also all systems.
is the fan on the electrical box positioned so its blowing over the drivers? How hot is the raspi getting? Mine had same issue and I added a fan to the raspi which brought temp down from 60c to 40c.