Rat Rig V Core 3 - Duet Board - RepRap Firmware
Hi there,
I'm wondering if anyone can help me - I'm trying to commission my Duet3 Mini 5 ethernet board; however, I've noticed that Rat Rig does seem to have any links to download any Duet config specific files for this. It seems as though Rat Rig no longer support the Duet Board and instead now prefer other boards (e.g. Octopus, etc.) with the RatOS, rather than Duet RepRap firmware.
Should I change my board and get a raspberry Pi?
Does anyone have the Duet_RRF.zip file with the bed.g, config.g, deployprobe.g, etc
#rrf-duet
5 Replies
RatOS is based on Klipper. Your best bet is to get a compatible board and a rpi4
https://github.com/HelgeKeck/RatOS/blob/documentation_v2.1/site/docs/boards/list.md is the latest list of boards supported by RatOS 2.1
GitHub
RatOS/site/docs/boards/list.md at documentation_v2.1 · HelgeKeck/Ra...
The preconfigured Raspberry Pi image that makes it easy to run Klipper + Moonraker + Mainsail on your printer. - HelgeKeck/RatOS
anythinkg outside of that you are on your own to try and make work with RatOS or you can spin your own setup
@oliof [RRF] maybe you can help here?
there are a number of example configs pinned in #rrf-duet
Note that the 4028s draw more current than the Duet boards provide on 12V so you would need to find something else to power them (I used an external 24 to 12V buck converter I powered from the PSU, pwm control still runs as normal)