Cannot connect to Klipper
Total new install. Updated all packages. Connects to Moonraker but cannot connect to Klipper.
Solution:Jump to solution
I unplugged the Beacon. Replaced the USB from RPi to Board. Now running config. It reflashed the board and this time the recheck worked.
15 Replies
https://discord.com/channels/582187371529764864/1233461645167169576 rule #2 - please upload applicable files and logs
Im sorry but what files and logs do you want to see?
the klippy.log is good
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/RatOS/btt-octopus-11: [Errno 2] No such file or directory: '/dev/RatOS/btt-octopus-11'did you flash your octopus using the configurator?
It took several minutes for the configurator to check the board. Then it said it was the wrong version, flashing. That took several more minutes. After flashing it returned to checking version. That never stopped checking.
what PI do you have?
4B
how is your PI connected to the network?
Was wifi. Then ethernet thinking that may help.
what version of ratos are you using?
Trying 2.1 because I added Beacon to my vcore 3.1
@miklschmidt what do you need to help debug?
After connecting to wifi, updated all packages before running configurator.
Solution
I unplugged the Beacon. Replaced the USB from RPi to Board. Now running config. It reflashed the board and this time the recheck worked.
I think I got it but leery. We’ll see.
