Randy28CR
UBUniversal Blue
•Created by Randy28CR on 3/12/2025 in #🛟bazzite-help
Xbox Controller Unresponsive on Wake from Suspend
After waking the system from sleep the controller successfully connects to the dongle but is unresponsive in Steam. Since usbreset is not included in the Bazzite image it's not a feasible workaround for Bazzite. To fix, the dongle needs to be unplugged but only after turning the controller off first. System reboot does not fix the issue.
Logs:
dmesg: https://github.com/user-attachments/files/19054183/dmesg.log
boot: https://github.com/user-attachments/files/19054203/boot.log
lsusb: https://github.com/user-attachments/files/19054866/lsusb.log
modinfo: https://github.com/user-attachments/files/19054924/modinfo.log
Hardware/System:
Xbox Elite 2 (Latest Firmware) connected via the Xbox Wireless Adapter (Unknown Firmware).
Bazzite 41 (FROM Fedora Kinoite); Linux 6.13.5-100.bazzite.fc41.x86_64
Repro Steps:
In Steam game mode via the controller put the system to sleep
Wake the system from sleep via the Xbox button (back into Steam game mode)
4 replies
UBUniversal Blue
•Created by Randy28CR on 2/7/2025 in #🛟bazzite-help
Performance bug - Steam recordings affecting frametime
Hello team. Just updated to the latest version of Bazzite (Feb 6, 2025) and I noticed something weird about my games' performance: every single game was very stuttery.
After some basic troubleshooting, I noticed that what was affecting is Steam recording being enabled; however, this was working perfectly fine before updating the system.
I have attached a video to show you the issue in action.
Regards!
17 replies
UBUniversal Blue
•Created by Randy28CR on 1/27/2025 in #🛟bazzite-help
Xbox Wireless adapter now working properly
Hello team.
Thank you so much for such a great job!
I would like to share with you an issue I currently have in both my HTPC and ROG Ally:
I plug the Xbox Wireless Adapter (already tested V1 and V2 of the official adapter), then sync the controller. They work great.
However, when I suspend the device and wake up, the controller connects, but it just doesn't work at all. I need to unplug it, plug it again and do the whole sync process again because even if I unplug it and try to connect it back, the controller just does not work even though it brightens as it is connected.
Any help?
I am a noob and tried to install xone, but got an error.
Regards!
3 replies
UBUniversal Blue
•Created by Randy28CR on 1/24/2025 in #🛟bazzite-help
GPU TDP capped?
Hi there!
Just installed Bazzite on my main rig with a R5 7600x and RX 6700xt.
I have noticed that the GPU never goes above 143w, when according to LACT the top should be 221w.
Any idea? I love how this works but I need to unlock the full GPU potential
1 replies