JC
UBUniversal Blue
•Created by JC on 2/10/2025 in #🛟bazzite-help
Legion Go Gyro problems, erratic movement output
Basically my gyro is just completely erratic, doing the same real life circular movement will alternate between causing a tiny circular movement or a giant huge movement causing my character to completely turn around. This alternating is constant, from one second to the other, it's not like it's this way for 10 minutes and then the other way for 10 minutes. Each repetition of the same real life movement causes wildly different actual movement results.
I've already calibrated the gyro using both the hardware calibration (hold down the buttons for 7 seconds etc) and using the Bazzite calibration also. The Bazzite software calibration takes btw around 20 or 30 attempts until it finally finishes.
Emulated controller is set to Steam Controller and I've tried with using left, right, or both controllers for gyro input in HHD, same results.
It's all working fine under Windows with Handheld Companion, so I don't think it's a hardware issue.
I've also made sure that no gyro controls are activated in Legion Space, I know that can interfere with things.
Any ideas how to improve this?
69 replies
UBUniversal Blue
•Created by JC on 1/24/2025 in #🛟bazzite-help
Bazzite + Refind on Legion Go: random freezing on Refind boot selection screen
I installed Refind in Bazzite desktop mode. I'm dual booting Windows on the same drive. 50% of the time it works fine. But 50% of the time Refind just hangs on the boot selection screen, is unresponsive, and the fan spins up to full speed. I have to hold down the power button to shut down the Go and then try again.
This is very strange, has anybody else encountered this?
23 replies
UBUniversal Blue
•Created by JC on 1/22/2025 in #🛟bazzite-help
Legion Go FPS limiter broken - seems to limit to random value
Hey, when I turn on the limiter and set it to 48 FPS (144Hz), for some God-forsaken reason the game is actually limited to 29 FPS. When unlimited, it runs in the high 60s, so it's not a performance issue.
With mangohud command line I can successfully limit it to 48 FPS. But I'd much rather use the OS controls. Mangohud also gives some weird error message on startup (despite working correctly) which is also annoying.
11 replies