Infill failure
I believe it's a retraction problem on my 3.1 500. But even after tinkering with it I still get constant artifacts flying off the print. I've reduced the extrusion to 96%. Printing PETG at 235. I did a calibration cube that came out great but this benchy is giving me problems when I get to the point it starts the infill. Any suggestions?
5 Replies
have you tried a different infill? Wonder if it is a restraction issue
I haven't. I just finished putting this thing back together after is killed itself months ago with a blob of death. But I'm using the same infill pattern I've always used and it's never given me issues before. What do your retraction settings look like?
super slicer defaults, they've worked out of the box
I used the same at first. Changed it up because I had the same issue is posted about. No improvement.
Problem solved. Needed to adjust slicer settings from default to my .6 nozzle. I thought I had done it already.
That'd do it!