Beacon Probe initial Calibration
Hey I built my VCore 4 Idex the last Week and i worked myself threw the Comissioning Guide. I am stuck with the initial Beacon Calibration. I typed the Command BEACON_INITIAL_CALIBRATION and X and Y Home normal.
But Z moves down away from the nozzle until it hits the Bottom of the machine.
While following the RatOS Dokumentation I switched the motor Directions of the Z motors. I think that could be the Problem.
Can somebody help me with this Problem?
9 Replies
upload your debug.zip please
Sorry but where can i find the debug.zip?
you can download from the sidebar in the configurator
Thank you
lines 90, 100, and 107 in your printer.cfg - as per the comment add
! to reverse the directionBut then the Bed moves in the wrong direction. When i klick the arrow up it would move down
change the mainsail interface to have the buttons behave that way
the buttons by default are for how the hotend moves from the bed, not the bed moving in relation to the hotend
so the "up" arrow, moves the hotend away from the bed
but there is an option in the menu to invert that logic
Ok thank you
Arrow up means bigger distance between bed and hotend. You can change that as said by blacksmithforlife