Nuxt•20h ago

Amplify deployment

How i can deploy nuxt 3 app with ssr in aws amplify with redirect rules

8 Replies

Hi @Merite. I'm kapa.ai, your friendly support bot. I will try to answer your question by searching through the knowledge base. :wave: ---------------------- To deploy a Nuxt 3 app with SSR in AWS Amplify and include redirect rules, you'll need to follow these steps: 1. First, ensure your Nuxt 3 app is configured for SSR. This is the default mode for Nuxt 3, so you shouldn't need to change anything unless you've explicitly set it to static site generation (SSG). 2. For AWS Amplify deployment, you'll need to create an amplify.yml file in your project root. Here's an example configuration:

version: 1
frontend:
  phases:
    preBuild:
      commands:
        - nvm use 18 && node --version
        - npm install -g pnpm
        - pnpm install
    build:
      commands:
        - pnpm run build
  artifacts:
    baseDirectory: .output
    files:
      - '**/*'
  cache:
    paths:
      - node_modules/**/*

version: 1
frontend:
  phases:
    preBuild:
      commands:
        - nvm use 18 && node --version
        - npm install -g pnpm
        - pnpm install
    build:
      commands:
        - pnpm run build
  artifacts:
    baseDirectory: .output
    files:
      - '**/*'
  cache:
    paths:
      - node_modules/**/*

This configuration is based on the example provided in the Stack Overflow post about AWS Amplify deployment (https://stackoverflow.com/questions/78278760). 3. To include redirect rules, you can use Nuxt's routeRules configuration in your nuxt.config.ts file. Here's an example:

export default defineNuxtConfig({
  routeRules: {
    '/old-page': { redirect: '/new-page' },
    '/old-page/**': { redirect: '/new-page/**' },
  }
})

export default defineNuxtConfig({
  routeRules: {
    '/old-page': { redirect: '/new-page' },
    '/old-page/**': { redirect: '/new-page/**' },
  }
})

This configuration is based on the information from the Nuxt documentation on Route Rules (https://nuxt.com/docs/guide/concepts/rendering#route-rules). 4. When deploying to AWS Amplify, make sure to select the "Web Compute" platform. If you've previously deployed as a static site, you may need to update the platform using the AWS CLI:

aws amplify update-app --app-id <app-id> --platform WEB_COMPUTE --region <region>

aws amplify update-app --app-id <app-id> --platform WEB_COMPUTE --region <region>

This step is crucial, as mentioned in the Stack Overflow post about AWS Amplify deployment (https://stackoverflow.com/questions/78278760). 5. In your AWS Amplify console, ensure that you've enabled server-side rendering for your app. Remember that AWS Amplify support for Nuxt 3 SSR is relatively new, so you might encounter some issues. Always refer to the latest AWS Amplify documentation for the most up-to-date information. Nuxt documentation on AWS Amplify deployment (https://nitro.unjs.io/deploy/providers/aws-amplify) provides more detailed information about deploying Nuxt apps to AWS Amplify, including advanced configuration options. If you encounter any specific issues during deployment, you may need to troubleshoot based on the error messages you receive. ---------------------- Note: you can ask me a follow up question by @ mentioning me again :speech_balloon: ----------------------

kapa.ai•20h ago

<@1036964895196987452> Kapa.ai is still learning and improving, please let me know how I did by reacting below.

MeriteOP•20h ago

@kapa.ai i receive 502

kapa.ai•20h ago

Let me check the knowledge base for you again. One moment! :books: ---------------------- I apologize for the inconvenience you're experiencing with the 502 error. Unfortunately, I don't have enough specific information in the provided knowledge sources to directly address this particular error in the context of deploying a Nuxt 3 app with SSR on AWS Amplify. However, I can offer some general troubleshooting steps based on common issues: 1. Check your Nuxt configuration: Ensure that your nuxt.config.ts file is correctly set up for SSR deployment. 2. Verify your amplify.yml file: Make sure it's properly configured for a Nuxt 3 SSR app, as shown in the Stack Overflow post about AWS Amplify deployment (https://stackoverflow.com/questions/78278760). 3. Confirm the platform setting: As mentioned earlier, ensure that your Amplify app is set to use the "Web Compute" platform. You can verify this in the Amplify console or use the AWS CLI command provided in the previous answer. 4. Review your server-side code: The 502 error often indicates a problem with the server-side execution. Check any server-side API routes or serverless functions for potential issues. 5. Check Amplify logs: Review the build and deployment logs in the AWS Amplify console for any specific error messages that might provide more context. 6. Verify environment variables: If your app relies on environment variables, make sure they are correctly set in the Amplify console. If the issue persists after checking these points, you might need to reach out to AWS Amplify support or consult their documentation for more specific troubleshooting steps related to 502 errors. For more detailed guidance on deploying Nuxt apps to AWS Amplify, you can refer to the Nuxt documentation on AWS Amplify deployment (https://nitro.unjs.io/deploy/providers/aws-amplify). Hmm, I do not have enough information to answer your question. ---------------------- Note: you can ask me a follow up question by @ mentioning me again :speech_balloon: ----------------------

kapa.ai•20h ago

<@1036964895196987452> Kapa.ai is still learning and improving, please let me know how I did by reacting below.

MeriteOP•12h ago

@kapa.ai <div> <UInput :ui="{ placeholder: 'placeholder-gray-500', icon: { base: 'text-mgp-deep-slate', } }" variant="none" size="sm" color="white" :trailing="false" placeholder="D'ou part le colis" /> </div> comment puis je enlever les padding mis par le size sm de nuxt ui

kapa.ai•12h ago

Let me check the knowledge base for you again. One moment! :books: ---------------------- Pour enlever les paddings ajoutés par la taille "sm" de Nuxt UI pour le composant UInput, vous pouvez utiliser la prop padded. Voici comment vous pouvez modifier votre code :

<div>
  <UInput 
    :ui="{ 
      placeholder: 'placeholder-gray-500', 
      icon: { base: 'text-mgp-deep-slate' }
    }"
    variant="none" 
    size="sm" 
    color="white" 
    :trailing="false" 
    :padded="false"
    placeholder="D'ou part le colis" 
  />
</div>

<div>
  <UInput 
    :ui="{ 
      placeholder: 'placeholder-gray-500', 
      icon: { base: 'text-mgp-deep-slate' }
    }"
    variant="none" 
    size="sm" 
    color="white" 
    :trailing="false" 
    :padded="false"
    placeholder="D'ou part le colis" 
  />
</div>

En ajoutant :padded="false" à votre composant UInput, vous supprimez le padding par défaut ajouté par Nuxt UI. Cette fonctionnalité est documentée dans la documentation de Nuxt UI pour le composant Input (https://ui.nuxt.com/components/input#padded). Si vous avez besoin d'ajuster davantage le style, vous pouvez toujours ajouter des classes personnalisées ou utiliser la prop ui pour remplacer les styles par défaut. ---------------------- Note: you can ask me a follow up question by @ mentioning me again :speech_balloon: ----------------------

kapa.ai•12h ago

<@1036964895196987452> Kapa.ai is still learning and improving, please let me know how I did by reacting below.

Gaming

Programming

Amplify deployment