Not able to print IDEX
Error when trying to print the first layer test file.
Error evaluating 'gcode_macro START_PRINT:gcode': gcode.CommandError: Something went wrong! Missing important post processor start print parameter!
Unknown command:"EXCLUDE_OBJECT_DEFINE"
File selected
File opened:firstlayer_test_0.25mm_PLA_3m23s.gcode Size:45654
Solution:Jump to solution
Your slicer isn't configured properly, see https://github.com/HelgeKeck/RatOS/blob/documentation_v2.1/site/docs/slicers.md
GitHub
RatOS/site/docs/slicers.md at documentation_v2.1 · HelgeKeck/RatOS
The preconfigured Raspberry Pi image that makes it easy to run Klipper + Moonraker + Mainsail on your printer. - HelgeKeck/RatOS
5 Replies
bruh
different problem
Solution
Your slicer isn't configured properly, see https://github.com/HelgeKeck/RatOS/blob/documentation_v2.1/site/docs/slicers.md
GitHub
RatOS/site/docs/slicers.md at documentation_v2.1 · HelgeKeck/RatOS
The preconfigured Raspberry Pi image that makes it easy to run Klipper + Moonraker + Mainsail on your printer. - HelgeKeck/RatOS
START_PRINT particularly
ok
should i also switch to prusa slicer?
or is orca ok
It works! 🗣️
Thanks